A Preliminary Study on Recyclability of Mixed Plastic Wastes Recovered from Urban Collection

Abstract

The management of post-consumer plastic waste (PCPW) is a real challenging issue due to difficulties in effectively identifying and sorting the collected plastics and in their mechanical recycling. Indeed, mechanically recycled post-consumer plastic waste usually shows poor performances compared to virgin materials, due to incompatibility between constituents, presence of degraded materials, hygroscopicity and bad odors. Compatibilizers and nanoparticles can help to improve recycled plastics quality, but to be chosen and dosed properly they require an in-depth knowledge and characterization of the raw waste. In this study, an analysis of polymeric materials obtained from the separation and mechanical recycling of post-consumer plastic wastes from urban collection as pellets (UPW) is reported. In particular, the experimental characterization was carried out in order to identify UPW composition, water content, physical-chemical properties and processability. It was found that UPW samples are mainly constituted of polyethylene (PE) and polypropylene (PP) in equal parts. UPW was submitted to a melt processing operation, using a lab-scale single-screw extruder, obtaining ribbons that were completely characterized. With the aim to investigate the effect of water content on the recycled material processability and performance, the recycling process was carried out both on undried and dried UPW pellets.

Recycling of Polypropylene Recovered from a Composting Plant: Mechanical Behavior of Compounds with Virgin Plastic

“…Near infrared range radiation has proven to be very effective for recovering polyethylene and polypropylene from mixed waste [12]. Some of the literature deals with the recyclability of polyolefins [17] and some reports are focused on the use of recycled polypropylene in plastic compounding [8,10]. However, as far as we know, the recovery and recycling of polyolefins from the waste rejected by MBT plants has not been well investigated until now, even though this waste shows potential for the recycling of its components [18].…”