A self-balancing platform on a mobile car

Abstract

<span lang="EN-US">In the last years, the self-balancing platform has become one of the most common candidates to use in many applications such as flight, biomedical fields, and industry. In this paper, the physical prototype of a proposed self-balancing platform that described the self-balancing attitude in the (X-axis, Y-axis, or biaxial) under the influence of road disturbance has been introduced. In the physical prototype, the inertial measurement unit (IMU) sensor will sense the disturbance in (X-axis, Y-axis, and biaxial). With the determined error, the corresponding electronic circuit, DC servo motors, and the Arduino software, the platform overcame the tilt angle(disturbance). Optimization of the proportional-integral-derivative (PID) controllers’ coefficients by the genetic algorithm method effectively affected the performance of the platform, as the platform system is stable and the platform was able to compensate for the tilt angle in (X-axis, Y-axis, and both axes) and overcome the error in a time that does not exceed four seconds. Therefore, a proposed self-balancing platform’s physical prototype has a high balancing accuracy and meets operational requirements despite the platform’s simple design.</span>

Autonomous and smart cleaning mobile robot system to improve the maintenance efficiency of solar photovoltaic array

“…Autonomous mode is based on PID control by the input from IMU reading [23]. The MPU 6050 IMU sensor consists of an accelerometer and a gyroscope [24], [25]. IMU is used to maintain the stability of the 6 degree of freedom maneuver controlled by intelligent control techniques [26], [27].…”