A simulation study on the interaction between sloping marine structure and level ice based on cohesive element model

Wang, Rui; Zou, Zao-Jian; Zhou, Li; Yizhou, Ren; Wang, Shuqi

doi:10.1016/j.coldregions.2018.01.022

Cited by 40 publications

(27 citation statements)

References 27 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The mesh size influences both the maximum load and the load frequency greatly. This finding is similar to those in Wang et al and Lu et al for simulating ice-sloping structure interactions [17,18]. It is also found that the mean, standard deviation, and maximum values derived from the simulated ice forces increase with increasing failure strain.…”

Section: Discussionsupporting

confidence: 90%

“…It is found that a mesh size (0.6 m) that is 1.5 times the ice thickness (0.4 m) predicts maximum ice force with reasonable accuracy for all tests (see Figure A5), in which the discrepancy between the simulations and the model tests ranges from 0.3% to 9.3%. The size ratio (mesh size/ice thickness) is similar to that in Wang et al for simulating the interaction between sloping marine structure and the level ice [18].…”

Section: Discussionmentioning

confidence: 98%

“…For finite element analyses of ice-structure interactions, the constitutive material model for the ice is a critical factor to accurately predict maximum ice forces [28]. Wang et al proposed an ice model for the interaction between sloping marine structure and level ice by using the cohesive element model [18]. In their model, the isotropic elasto-plastic linear softening constitutive model proposed by Hilding et al was introduced to present the microscopic crushing of the ice sheet, while the bending failure of ice sheet was caused by the failure of cohesive elements [29].…”

Section: Materials Modelsmentioning

confidence: 99%

“…The simulated crushing forces agreed well with the experimental results. Lu et al and Wang et al carried out numerical simulations of interactions between level ice and sloping structure using the cohesive element method [17,18]. Zhou et al proposed a numerical model to simulate the non-simultaneous crushing force acting on the cylindrical structures of wind turbines [19].…”

Section: Introductionmentioning

confidence: 99%

See 3 more Smart Citations

Numerical Study of the Interaction between Level Ice and Wind Turbine Tower for Estimation of Ice Crushing Loads on Structure

Song

Ren

Zhou

2019

JMSE

Self Cite

View full text Add to dashboard Cite

In this paper, the interaction between level ice and wind turbine tower is simulated by the explicit nonlinear code LS-DYNA. The isotropic elasto-plastic material model is used for the level ice, in which ice crushing failure is considered. The effects of ice mesh size and ice failure strain on ice forces are investigated. The results indicate that these parameters have a significant effect on the ice crushing loads. To validate and benchmark the numerical simulations, experimental data on level ice-wind turbine tower interactions are used. First, the failure strains of the ice models with different mesh sizes are calibrated using the measured maximum ice force from one test. Next, the calibrated ice models with different mesh sizes are applied for other tests, and the simulated results are compared to corresponding model test data. The effects of the impact speed and the size of wind turbine tower on the comparison between the simulated and measured results are studied. The comparison results show that the numerical simulations can capture the trend of the ice loads with the impact speed and the size of wind turbine tower. When a mesh size of ice model is 1.5 times the ice thickness, the simulations can give more accurate estimations in terms of maximum ice loads for all tests, i.e., good agreement between the simulated and measured results is achieved.

show abstract

Section: Discussionsupporting

confidence: 90%

Section: Discussionmentioning

confidence: 98%

Section: Materials Modelsmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

See 2 more Smart Citations

Numerical Study of the Interaction between Level Ice and Wind Turbine Tower for Estimation of Ice Crushing Loads on Structure

Song

Ren

Zhou

2019

JMSE

Self Cite

View full text Add to dashboard Cite

show abstract

“…CZM was firstly proposed by Hillerborg et al [21] to model the local crack propagation of an unreinforced concrete beam. Due to the good performance of CEM in modeling the initiation and propagation of crack, many researchers have introduced CEM into ice mechanics to simulate the fracture of ice material [22,23,24,25].…”

Section: Numerical Modelsmentioning

confidence: 99%

Numerical Simulation of Ice Milling Loads on Propeller Blade With Cohesive Element Method

Wang

Zou

Zhou

et al. 2019

brod

Self Cite

View full text Add to dashboard Cite

In ice-infested waters, propellers of a polar ship are likely to be exposed to ice loads in different scenarios. Propeller milling with ice is one of the most dangerous cases for icepropeller interaction. In this study, we try to simulate dynamic milling process of icepropeller and reproduce resulting physical phenomena. Cohesive element method is used to model ice in the simulation. To simulate material properties of ice, an elastoplastic softening constitutive law is developed. Both crushing and fracture failures are included in the icepropeller milling process. The ice loads in 6 Dofs acting on blades of a propeller are calculated in time domain. The average and standard deviations of simulated dominant ice loads are compared with those from model test. A good agreement is achieved. By varying propeller rotation speed, advance velocity and cutting depth on ice block, the sensitivity study has been carried out. The results show that dominant ice loads are affected much by the three parameters. It is shown that decreasing rotation speed, or increasing advance velocity and cutting depth may lead to higher ice loads. Care should be taken to avoid overloading on propeller when operating in ice for polar ship.

show abstract

Sloping Structure–Level Ice Interactions

Lü

2022

Encyclopedia of Ocean Engineering

View full text Add to dashboard Cite

A simulation study on the interaction between sloping marine structure and level ice based on cohesive element model

Cited by 40 publications

References 27 publications

Numerical Study of the Interaction between Level Ice and Wind Turbine Tower for Estimation of Ice Crushing Loads on Structure

Numerical Study of the Interaction between Level Ice and Wind Turbine Tower for Estimation of Ice Crushing Loads on Structure

Numerical Simulation of Ice Milling Loads on Propeller Blade With Cohesive Element Method

Sloping Structure–Level Ice Interactions

Contact Info

Product

Resources

About