A soft pneumatic bistable reinforced actuator bioinspired by Venus Flytrap with enhanced grasping capability

Abstract

Soft actuators, as an important part of soft robotics, have attracted significant attention due to their inherent compliance, flexibility and safety. However, low capacity in force and load limits their applications. Prestored elastic energy can improve the capacity in output force and load of soft actuators. This work introduces a soft pneumatic bistable reinforced actuator inspired by the Venus Flytrap's bistable mechanism that allows for the storage of elastic energy. The proposed actuator consists of two separated 3D-printed actuation chambers that are attached to a central prestressed steel shell to achieve bistability. The pressure triggering the pneumatic bistable reinforced actuator from one stable state to the other is derived and validated by experiments. Further experimental comparisons between the proposed actuator and a dual chamber actuator show that the proposed design significantly improves the block tip force, load capacity and stiffness. The pneumatic bistable reinforced actuator also demonstrates superior performance in the actuation speed and bending angle under the same input pressure. Finally, a two-finger gripper is developed using the proposed actuator, which is demonstrated to grasp and hold various objects.

Real-Time Fruit Recognition and Grasping Estimation for Robotic Apple Harvesting

“…The manipulator helps perform the path planning together with the end-effector. Our end-effector adopted the design principle of the soft robotic grippers that have been explored significantly for robotic grasping application recently [ 45 , 46 ]. The proposed end-effector combines the compliant mechanism and the safe contact as a result of the fin-ray design and low elastic modulus material m4601, respectively.…”

Bio-inspired life-like motile materials systems: Changing the boundaries between living and technical systems in the Anthropocene

“…Amongst other systems, these were driven by photo-thermally produced heat (Dong et al, 2020;Lim et al, 2017) or via joule heating (Kim et al, 2014;Lim et al, 2017) (Figure 6b). Furthermore, AVFT systems exist, in which the "trap" closure movements are actuated via magnetism (Esser et al, 2019;Schmied et al, 2017;Zhang et al, 2016) (Figure 6c), electricity (Shahinpoor, 2011;Shahinpoor and Thompson, 1995), pressurized air (Esser et al, 2019;Pal et al, 2020;Temirel et al, 2016;Wang et al, 2020) (Figure 6d), temperature changes (Esser et al, 2019;Riley et al, 2020) (Figure 6b), or hydrogel swelling or shrinking activated via enzymes (Athas et al, 2016) or moisture (Esser et al,. 2019;Fan et al, 2019;Lee et al, 2010;Zhu et al, 2020) (Figure 6e).…”

Intelligent Robots for Fruit Harvesting: Recent Developments and Future Challenges

“…Leaf thinning or leaf removal through manual or mechanical means has been a common practice in modern viticulture to increase ventilation and sunlight exposure and thus improve fruit quality and production (Zhuang et al 2014;Bogicevic 2015). Researchers have explored mechanical approaches to clear leaves temporarily for fruit extraction (Lee and Rosa 2006), However, As the soft robotic gripper becomes signi cantly popular for autonomous grasping application (Crooks et al 2016;Wang et al 2020), Zhou in (Kang et al 2020a) developed an adaptive gripper that can reach through the canopy through the canopy and pushing away the leaves around the target fruit without damaging the canopy structure.…”