A Study of Power Production and Noise Generation of a Small Wind Turbine for an Urban Environment

Abstract

Wind energy has had a major impact on the generation of renewable energy. While most research and development focuses on large, utility-scale wind turbines, a new application is in the field of small wind turbines in the urban environment. A major design challenge for these urban wind turbines is the noise generated during operation. This study examines the power production and the noise generated by two small-scale wind turbines tested in a small wind tunnel. Both rotors were designed using the Blade-Element Momentum Theory and either the NREL S823 or the Eppler 216 airfoils. Point noise measurements were taken using a 1/4” microphone at three locations downstream of the turbine: 16% of the diameter (two chord lengths), 50% of the diameter, and 75% of the diameter. At each horizontal location downstream of the turbine, a vertical traverse was performed to analyze the sound pressure level from the tip of the turbine blades down to the hub. The rotor designed with the Eppler 216 airfoil showed a 9% increase in power production and decrease of up to 7 dB(A).

Analysis of wind energy resources from high rise building for micro wind turbine: A review

“…The construction of building integrated wind turbines is four times better than that of Savonius wind turbines. Hays and Van Treuren (2019) Experimental study HAWT/VAWT Study the performance of small-scale wind turbines with two different rotor airfoils, that is, NREL S823 and Epper216. The thinner the airfoils, the higher the aerodynamic performance and power coefficient.…”