A Supplementary System for a Brain-Machine Interface Based on Jaw Artifacts for the Bidimensional Control of a Robotic Arm

Abstract

Non-invasive Brain-Machine Interfaces (BMIs) are being used more and more these days to design systems focused on helping people with motor disabilities. Spontaneous BMIs translate user's brain signals into commands to control devices. On these systems, by and large, 2 different mental tasks can be detected with enough accuracy. However, a large training time is required and the system needs to be adjusted on each session. This paper presents a supplementary system that employs BMI sensors, allowing the use of 2 systems (the BMI system and the supplementary system) with the same data acquisition device. This supplementary system is designed to control a robotic arm in two dimensions using electromyographical (EMG) signals extracted from the electroencephalographical (EEG) recordings. These signals are voluntarily produced by users clenching their jaws. EEG signals (with EMG contributions) were registered and analyzed to obtain the electrodes and the range of frequencies which provide the best classification results for 5 different clenching tasks. A training stage, based on the 2-dimensional control of a cursor, was designed and used by the volunteers to get used to this control. Afterwards, the control was extrapolated to a robotic arm in a 2-dimensional workspace. Although the training performed by volunteers requires 70 minutes, the final results suggest that in a shorter period of time (45 min), users should be able to control the robotic arm in 2 dimensions with their jaws. The designed system is compared with a similar 2-dimensional system based on spontaneous BMIs, and our system shows faster and more accurate performance. This is due to the nature of the control signals. Brain potentials are much more difficult to control than the electromyographical signals produced by jaw clenches. Additionally, the presented system also shows an improvement in the results compared with an electrooculographic system in a similar environment.

Hybrid Brain–Computer Interface Techniques for Improved Classification Accuracy and Increased Number of Commands: A Review

“…An EEG–EMG-based motion estimation method was proposed for the control of the forearm and the supination/pronation motion of the artificial arm. In 2014, signals produced by jaw clenching were removed from EEG signals for two-dimensional cursor control on a computer screen (Costa et al, 2014 ). This study was later extended to the control of a robotic arm in bi-dimensional workspace.…”

Towards BCI-actuated smart wheelchair system

“…The validation command is produced by the user voluntarily clenching his jaw. In [ 28 ], the researchers designed a method to classify 5 clenching tasks based on EMG signals extracted from EEG recordings. They evaluated the power spectral density while the users clenched their jaws.…”

Classify four imagined objects with EEG signals

“…One possibility is to use technology based on Brain-Computer Interface (BCI) systems, which allows the direct communication between the central nervous system and the outside world without having to use the peripheral nervous system, creating a direct link between the brain and the outside world. Nowadays we can already find several uses for this technology such as the control of a robotic arm [1] [2], neurorehabilitation [3] [4] [5], control of video games [6], and classification of imagined words [7] [8]. All of these works prove that BCI systems are a real technology, not only theoretical, that is starting to achieve its first practical results.…”