Accelerated 4D self‐gated MRI of tibiofemoral kinematics

Abstract

Anatomical (static) magnetic resonance imaging (MRI) is the most useful imaging technique for the evaluation and assessment of internal derangement of the knee, but does not provide dynamic information and does not allow the study of the interaction of the different tissues during motion. As knee pain is often only experienced during dynamic tasks, the ability to obtain four-dimensional (4D) images of the knee during motion could improve the diagnosis and provide a deeper understanding of the knee joint. In this work, we present a novel approach for dynamic, high-resolution, 4D imaging of the freely moving knee without the need for external triggering. The dominant knee of five healthy volunteers was scanned during a flexion/extension task. To evaluate the effects of non-uniform motion and poor coordination skills on the quality of the reconstructed images, we performed a comparison between fully free movement and movement instructed by a visual cue. The trigger signal for self-gating was extracted using principal component analysis (PCA), and the images were reconstructed using a parallel imaging and compressed sensing reconstruction pipeline. The reconstructed 4D movies were scored for image quality and used to derive bone kinematics through image registration. Using our method, we were able to obtain 4D high-resolution movies of the knee without the need for external triggering hardware. The movies obtained with and without instruction did not differ significantly in terms of image scoring and quantitative values for tibiofemoral kinematics. Our method showed to be robust for the extraction of the self-gating signal even for uninstructed motion. This can make the technique suitable for patients who, as a result of pain, may find it difficult to comply exactly with instructions. Furthermore, bone kinematics can be derived from accelerated MRI without the need for additional hardware for triggering.

Rapid Knee MRI Acquisition and Analysis Techniques for Imaging Osteoarthritis

“…More recently, screen printed MRI coils 129,130 and adaptive image receive (AIR) coils 131 have been developed to further enhance the flexibility of coils to conform to multiple forms of anatomy while being inherently lightweight. In addition, new high‐impedance detectors 132 and stretchable RF conductors 133 formed by liquid metal have been incorporated into wearable and even stretchable coils, which may not only optimize SNR for an anatomy of interest, but also optimize imaging during movement in order to assess tissue biomechanics 134 . In combination with more efficient pulse sequences, improved hardware promises better access and flexibility for imaging bones and joints while improving scan times and patient comfort.…”

A Novel Ultrasound-Based Lower Extremity Motion Tracking System

“…Although using a robotic trolley or gantry carrying the fluoroscopic system following the movement of subject extends the FOV, the radiation exposure to the subject remains inevitable. Recently advanced four-dimensional (4D) MRI [30][31][32] and CT [33,34] techniques have been reported to track the bone motion and to quantify the respective joint kinematics inside the scanners [30][31][32]. The disadvantages of this method are the limited FOV, limited sample rate, and the inability to measure kinematics during daily activities.…”

OpenForce MR: A low‐cost open‐source MR‐compatible force sensor

“…8,9 This kind of evoked contractions can be used for the study of specific muscles or muscle groups. Often, gated sequences are used that combine data acquired from multiple contractions, 1,8,10 and therefore periodicity is necessary. However, in this case, the exercise is defined not by the load or the distance but by the force induced, so repeatability of the contraction presents a bigger challenge.…”