Active Optics—Advances of Cycloid-like Variable Curvature Mirrors for the VLTI Array

Abstract

Elasticity theory and active optics led us to the discovery of three geometrical configurations of variable curvature mirrors (VCMs) that are either cycloid-like or tulip-like thickness distributions. Cycloid-like VCMs are generated by a uniform load—air pressure—applied over the mirror rear surface, and reacts without any bending moment along its circular contour. This particular VCM configuration is of practical interest because it smoothly generates accurate optical curvatures, varying from plane at rest to spherical curvatures up to f/2.9 over 16-mm aperture under 6.5-bar air pressure. Starting from the thin plate theory of elasticity and modeling with NASTRAN finite element analysis, one shows that 3-D optimizations—using a non-linear static flexural option—provide an accurate cycloid-like thickness distribution. VCM elasticity modeling in quenched stainless steel–chromium substrates allows the obtaining of diffraction-limited optical surfaces: Rayleigh’s criterion is achieved over a zoom range from flat to f/3.6 over 13-mm clear aperture up to 6-bar loading. These VCMs were originally developed and built at the Marseille Observatory in 1975 and implemented as a cat’s-eye mirror of IR Fourier-transform interferometers for laboratory recording of fast events in gas molecular spectroscopy. Later, for high-angular resolution astronomy with the ESO VLTI array—an interferometer made of 8 m Unit Telescopes (UTs) and 1.8 m Auxiliary Telescopes (ATs)—such VCMs were inevitable components to provide in a 3″ co-phased field-of-view since 1998. They were implemented (1) as cat’s eye mirrors of the height delay-lines beam recombination lab and (2) as ATs mirror-pair for output pupil conjugation of the movable x–y baseline. From the ESO-AMU approved convention of making 10 VCM spares up to 2024, the present modeling should provide a diffraction-limited extended field-of-view. It is pure coincidence that present results from modeling with an outer collarette are identical to results from analytic theory without collarette.

Active Optics—Progress in Modeling of Tulip-like Variable Curvature Mirrors

“…Compared to both cases of the cycloid-like VCMs [17] and present tulip-like VCMs, this FEA modeling with a plate-collarette-ring in a one-piece assembly will require high geometric precision in the execution. This because, for a similar deflection amplitude up to f /3.5, the edge thickness of the plate is much thinner in the tulip-like case.…”