Actuator tests for a large deformable membrane mirror

Abstract

In the design of a large adaptive deformable membrane mirror, variable reluctance actuators are used. These consist of a closed magnetic circuit in which a strong permanent magnet provides a static magnetic force on a ferromagnetic core which is suspended in a membrane. By applying a current through the coil which is situated around the magnet, this force is influenced, providing movement of the ferromagnetic core. This movement is transferred via a rod imposing the out-ofplane displacements in the reflective deformable membrane. In the actuator design a match is made between the negative stiffness of the magnet and the positive stiffness of the membrane suspension. If the locality of the influence functions, mirror modes as well as force and power dissipation are taken into account, a resonance frequency of 1500 Hz and an overall stiffness of 1000 N/m for the actuators is needed. The actuators are fabricated and the dynamic response tested in a dedicated setup. The Bode diagram shows a first eigenfrequency of 950 Hz. This is due to a lower magnetic force than expected. A Helmholtz coil setup was designed to measure the differences in a large set of permanent magnets. With the same setup the 2 nd quadrant of the B-H curve is reconstructed by stacking of the magnets and using the demagnetization factor. It is shown that the values for H c and B r of the magnets are indeed lower than the values used for the initial design. New actuators, with increased magnet thickness, are designed and currently fabricated.

Validation of a new adaptive deformable mirror concept

“…1 The aim for an 8-meter wavefront in the visible (550nm) is to decrease the root-mean-square (RMS) error in medium seeing conditions (r 0 =0.166m, λ=550nm)) to λ 16 . This results in the main specifications for the actuators:…”

“…1 The goal is to realize efficient and low stiffness actuators that can be manufactured in arrays instead of separate and individually positioned actuators. The arrays are realized by stacking different layers.…”