Advances in corrosion protection by organic coatings: What we know and what we would like to know

Lyon, S.B.; Bingham, R. V.; Mills, Douglas J

doi:10.1016/j.porgcoat.2016.04.030

Cited by 352 publications

(181 citation statements)

References 22 publications

Supporting

Mentioning

176

Contrasting

Unclassified

Order By: Relevance

“…Adhesion performance is one of the most important properties of protective coatings [57][58][59][60]. Therefore, in this study, the ASTM cross-cut tape test was performed to evaluate the effect of Gr addition on the adhesion of the composite coating to steel panels.…”

Section: Adhesion Of Composite Coatings By the Cross-cut Tape Testmentioning

confidence: 99%

Development and Characterization of Anticorrosion and Antifriction Properties for High Performance Polyurethane/Graphene Composite Coatings

2018

View full text Add to dashboard Cite

Abstract:This work contributes to the development and characterization of the corrosion resistance and antifriction properties of high performance polyurethane (PU)/graphene (Gr) composite coating. In this study, PU composite coatings containing 0, 2, 4 and 8 wt.% of Gr were prepared and evaluated using various corrosion and mechanical tests, namely electrochemical impedance spectroscopy, salt spray tests, cross-cut tape tests and dynamic mechanical analysis. Antifriction properties of the coatings were evaluated using a tribometer with a ball-on-disc mode at room temperature. The corrosion resistance and adhesion property of the PU coatings were found to be enhanced by adding 4 and 8 wt.% of Gr. The coefficient of friction revealed that the antifriction properties of the PU/Gr composite coatings were 61% lower than those of the conventional coating when the Gr content was increased to 8 wt.%.

show abstract

Section: Adhesion Of Composite Coatings By the Cross-cut Tape Testmentioning

confidence: 99%

Development and Characterization of Anticorrosion and Antifriction Properties for High Performance Polyurethane/Graphene Composite Coatings

2018

View full text Add to dashboard Cite

show abstract

“…In the last few decades, several types of organic-based coatings have been developed [85], including anti-fouling paints [70,[86][87][88][89][90][91][92][93][94], composites and nano-coatings [94][95][96], self-healing coatings [97][98][99][100][101][102][103][104][105][106][107], and hybrid sol-gel materials [98,[108][109][110][111][112][113][114][115][116][117][118][119][120][121] among others. However, as far as the authors' knowledge, very few studies were performed on OWSs using self-healing and hybrid sol-gel coatings.…”

Section: Coating Systemsmentioning

confidence: 99%

“…The ability of an organic-based coating to absorb moisture or allow it to diffuse through the metallic substrate may compromise the coating performance. For example, blistering of an organic-based coating may occur due to the presence of water under the coating (water uptake) [85].…”

Section: Polarization Resistance (R P )mentioning

confidence: 99%

Corrosion Protection Systems and Fatigue Corrosion in Offshore Wind Structures: Current Status and Future Perspectives

Price

Figueira

2017

Coatings

View full text Add to dashboard Cite

Concerns over reducing CO 2 emissions associated with the burning of fossil fuels in combination with an increase in worldwide energy demands is leading to increased development of renewable energies such as wind. The installation of offshore wind power structures (OWS) is one of the most promising approaches for the production of renewable energy. However, corrosion and fatigue damage in marine and offshore environments are major causes of primary steel strength degradation in OWS. Corrosion can reduce the thickness of structural components which may lead towards fatigue crack initiation and buckling. These failure mechanisms affect tower service life and may result in catastrophic structural failure. Additionally, environmental pollution stemming from corrosion's by-products is possible. As a result, large financial investments are made yearly for both the prevention and recovery of these drawbacks. The corrosion rate of an OWS is dependent on different characteristics of attack which are influenced by access to oxygen and humidity. Structural degradation can occur due to chemical attack, abrasive action of waves, and microorganism attacks. Inspired by technological and scientific advances in recent years, the purpose of this paper is to discuss the current protective coating system technologies used to protect OWS as well as future perspectives.

show abstract

“…The buried pipelines were arranged in a crisscross pattern, and this would cause fire and explosion once they start to corrode and leak; that would threaten the personal safety and cause environmental pollution. The anticorrosion coating of the buried pipeline often had disbonded area with broken open holiday due to the mechanical damage, aging and degradation, cathodic disbondment, and other reasons in the process of pipeline installation and using [6][7][8]. It formed the special corrosive environment between the anticorrosion coating and pipeline surface, and the moisture, the soluble ion like CO 2 and O 2 and other corrosive media in the soil got into the disbonded area through the holiday; that caused the corrosion of the metal under the disbonded coating [9][10][11].…”

Section: Introductionmentioning

confidence: 99%

Experimental Study on the Influence of Sulfate Reducing Bacteria on the Metallic Corrosion Behavior under Disbonded Coating

Fang¹,

Cui²,

Wang³

2017

International Journal of Corrosion

View full text Add to dashboard Cite

A rectangle disbonded coating simulation device was used to research the effect of sulfate reducing bacteria (SRB) on the metallic corrosion behavior under disbonded coating by the electrochemical method. The results showed that the metal self-corrosion potential at the same test point had little change in the initial experiment stage, whether the solution was without or with SRB. The potential amplitude in the solution with SRB was larger than that without SRB in the later corrosion period. The corrosion current density of the metal at the same test point increased gradually over time in the solution with or without SRB, and SRB could accelerate the corrosion of the metal in the disbonded crevice. The metal self-corrosion potential in the crevice had little change in the SRB solution environment after adding the fungicide, but the corrosion current density decreased significantly. That meant the growth and reproduction of SRB were inhibited after adding the fungicide, so the metal corrosion rate slowed down. Among the three kinds of solution environment, increasing the coating disbonded thickness could accelerate the corrosion of the metal in the crevice, and it was the largest in the solution with SRB.

show abstract

Advances in corrosion protection by organic coatings: What we know and what we would like to know

Abstract: This paper provides a brief overview of current knowledge in how protective coatings work and poses questions that we need to answer in order to develop a more predictive model for coating performance.

Cited by 352 publications

References 22 publications

Development and Characterization of Anticorrosion and Antifriction Properties for High Performance Polyurethane/Graphene Composite Coatings

Development and Characterization of Anticorrosion and Antifriction Properties for High Performance Polyurethane/Graphene Composite Coatings

Corrosion Protection Systems and Fatigue Corrosion in Offshore Wind Structures: Current Status and Future Perspectives

Experimental Study on the Influence of Sulfate Reducing Bacteria on the Metallic Corrosion Behavior under Disbonded Coating

Contact Info

Product

Resources

About