Aeration / Stripping of n-Butyl Mercaptan in aqueous environment

Abstract

ABSTRACTΜany applications in water quality management have a common key water quality parameter, dissolved oxygen, resulting to the critical role of aeration. On the other hand, in municipal and industrial wastewater, especially where aeration is applied, the presence of volatile organic compounds (VOCs) causes several concerns including a direct threat to humans, partly due to their emission from treatment tanks. pH, temperature and Henry's Law govern VOCs' speciation and consequently their emission characteristics. Limited data and simplifications of available mass-transfer models pose obstacles to a realistic approach, especially in the presence of a chemical equilibrium, for example in the case of mercaptans. In the present study the importance of oxygen transfer and stripping of a VOC (n-butyl mercaptan) on aeration's overall effectiveness are examined separately. Clean water oxygenation and stripping of mercaptan to an inert gas (nitrogen) were studied aiming to consider mass transfer aspects and to investigate the influence of chemical equilibrium between ionic and neutral form of the target compound in neutral and alkaline solutions. Using appropriate mass transfer relationships (dynamic method), experimental data were analyzed for the determination of overall mass transfer coefficient ( A coupled differential algebraic equation system, based on mass balances, taking into account dissociation of the compound to be stripped and assuming chemical non-equilibrium conditions during stripping, was developed. Reaction parameter k 2 was calculated with non-linear least-squares analysis. The model predicts satisfactorily the experimental data and it provides a useful tool for the semibatch stripper design in situations where a reversible reaction is involved. At pH values below 8.5 mercaptan concentration falls exponentially whereas above 10.5 it tends to linearity. The bubble equilibrates and mercaptan transferred depends upon solubility and not diffusivity. Especially after depletion of initial neutral compound, transport depends upon neutral/ionic form speciation. The effectiveness of stripping n-butyl mercaptan, at a given pH, is mainly determined by a proportionality constant considered as "fugacity capacity" (removal effect on the process) and by a reversible reaction rate constant k 2 (kinetic effect on the process). The ''fugacity capacity" is determined by hydrophobicity (i.e. low solubility and high limiting activity coefficient) rather than pure-component volatility (i.e. vapor pressure or boiling point). High limiting activity coefficient promotes mercaptan emission due to established vapor-liquid equilibrium, while the low reaction parameter k 2 , controls neutral compound quantity. At high pH, where ionic form predominates, experimental data showed that stripping was almost independent of the gas flow rate applied. A strong sensitivity of the model to uncertainty of γ ∞ MATSIS et al. 104was found: γ ∞ controls emission rate and through this the dynamic variations of neutral/ionic concentration prof...