Aerodynamic flow modelling of NACA 0010 using 2D panel and Jukouwski methods

Abstract

Purpose This paper aims to model the aerodynamic flow characteristics of NACA0010 for various angle of attacks including stall for incompressible flows using panel methods. This paper also aims to quantify the surface pressure distribution on streamlined bodies and validate the results with analytical Jukouwski method and inverse panel methods that can predict the aerodynamic flow behaviour using the geometric iteration approach. Design/methodology/approach The 2 D panel method was implemented in Qblade software v.06 which uses the fundamental panel method which rely on source strengths and influence coefficients to determine the velocity and pressure fields on the surface. The software implements the boundary layer or viscous effects to determine the influence on aerodynamic performance at various angles of attack. Jukouwski method is also evaluated for predicting aerodynamic characteristics and is based on the geometric iteration approach. Then complex aerodynamic flow potentials are determined based on the source strengths which are used to predict the pressure and velocity fields. Findings At low to moderate angles of attack, panel and Jukouwski methods predict similar results for surface pressure coefficients comparable to Hess and Smith inverse method. In comparison to panel method, results from the Jukouwski mapping method predicted the pressure coefficient conservatively for the same free stream conditions. With increase in Reynolds number, lift coefficient and aerodynamic performance improved significantly for un-tripped aerofoil when stall angle is approached when compared to tripped aerofoil. Practical implications This study demonstrated that panel methods have higher efficacy in terms of computational time or resources and thus can provide benefits to many real-world aircraft or aerospace design applications. Originality/value Even though panel and Jukouwski methods have been studied extensively in the past, this paper demonstrates the efficacy of both methods for modelling aerodynamic flows that range between moderate to high Reynolds number which are critical for many aircraft applications. Both methods have been validated with analytical and inverse design methods which are able to predict aerodynamic flow characteristics for simple bluff bodies, streamlined aerofoils as well as bio-inspired corrugated aerofoils.