An Aerodynamic Investigation of the Last-Stage Turbine in an Upgraded Gas Turbine

Abstract

Due to the lengthy certification process for newly designed turbine blades, product upgrading of industrial gas turbine units is often performed solely on compressor and combustor. Since their inlet conditions are significantly changed, the entire four-stage turbine operates far away from its original design point, leading to decreased efficiency and increased flutter risk. This investigation firstly performs numerical simulations to study the flow field change of the last-stage turbine in a gas turbine before and after product upgrading. To reduce the load of the last-stage turbine without reducing the power output of the whole turbine, the enthalpy drops of turbine is reallocated to the front three stages. After modifying the blade profile based on S1 stream surface analysis, a CFD simulation is carried out on the modified three-dimensional blade passage. It is shown that the modified blade design greatly reduces the Mach number at the tip outlet of the last-stage blade, thus possibly reducing flutter risk and improving the aerodynamic efficiency of the turbine. This paper also attempts to redesign the blade geometry by different radial blade stacking of both forward sweep and backward sweep. It is found that the backward-swept blade modification can effectively reduce the endwall flow loss. This work presents the improvements of the aerodynamic efficiency of last-stage through a series of improvement methods and provides a reference for future detailed optimization of this last-stage turbine.