An Efficiency–Accuracy Balanced Power Leakage Evaluation Framework Utilizing Principal Component Analysis and Test Vector Leakage Assessment

Abstract

The test vector leakage assessment (TVLA) is a widely used side-channel power leakage detection technology which requires evaluators to collect as many power traces as possible to ensure accuracy. However, as the total sample size of the power traces increases, the amount of redundant information will also increase, thus limiting the detection efficiency. To address this issue, we propose a principal component analysis (PCA)-TVLA-based leakage detection framework which realizes a more advanced balance of accuracy and efficiency. Before implementing TVLA to detect leakage, we project the original power data onto their most significant feature dimensions extracted by the PCA procedure and screen power traces according to the magnitude of their corresponding components in the variance of the projection vector. We verified the overall performance of the proposed framework by measuring the detection capability and efficiency with t-values and the required time, respectively. The results show that compared with similar existing schemes, under the best circumstances, the proposed framework decreases the t-value by 4.3% while saving time by 25.2% on the MCU platform and decreases the t-value by 2.4% while saving time by 38.0% on the FPGA platform.

Influence of Different Data Interpolation Methods for Sparse Data on the Construction Accuracy of Electric Bus Driving Cycle

“…In this paper, there are 1870 divided micro-trips, and there are 12 characteristic parameters defining each micro-trip, so an observation matrix of 1870 × 12 can be obtained [14].…”

“…In this paper, three different interpolation methods will be used to preprocess the collected data. The principal component analysis [14] and K-means clustering algorithm [15] will be used to reduce and classify the feature parameter matrix. The silhouette index [16] will be the standard for measuring clustering results.…”