2009
DOI: 10.1016/j.radmeas.2009.10.026
|View full text |Cite
|
Sign up to set email alerts
|

An extended study of the etching characteristics of CR-39 detectors

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
1
1

Citation Types

1
1
0

Year Published

2010
2010
2024
2024

Publication Types

Select...
7

Relationship

0
7

Authors

Journals

citations
Cited by 10 publications
(2 citation statements)
references
References 16 publications
1
1
0
Order By: Relevance
“…The results on the V b determination are shown in Figure 1. The graph shows the removed layer as a function of the etching time, confirming the linear trend expected for each material (excluding a nonlinear region in the beginning of the etch or ~25 min (6,7) ). The TASTRAK and RTP 0.1% are the 'softest' tested materials, with a V b of 14 and 12.8 μm/h, respectively (Table 2), i.e.…”
Section: Bulk Etch Ratesupporting
confidence: 72%
“…The results on the V b determination are shown in Figure 1. The graph shows the removed layer as a function of the etching time, confirming the linear trend expected for each material (excluding a nonlinear region in the beginning of the etch or ~25 min (6,7) ). The TASTRAK and RTP 0.1% are the 'softest' tested materials, with a V b of 14 and 12.8 μm/h, respectively (Table 2), i.e.…”
Section: Bulk Etch Ratesupporting
confidence: 72%
“…A quality control programme is provided in order to guarantee the constancy of experimental parameters. The temperature and concentration of the solution during the etching process were monitored using a temperature probe integrated in a WTW conductivity meter (Inolab 740, WTW) [21]. This programme requires that the KOH blank solution has a conductivity of 550 ± 5 mS cm −1 at the reference temperature of 20 • C; this value corresponds to a concentration of 5.4 M. During the etching process a variation of conductivity not higher than 2% is tolerated.…”
Section: Reproducibility Of the Etching Proceduresmentioning
confidence: 99%