An improved method for evaluating fracture density using pulsed neutron capture logging

Abstract

Fracture density is a critical fracture evaluation parameter for the optimization and production prediction of hydraulic fracturing models. Non-radioactive tracer techniques (NRT) have successfully used a quantitative fracture density method based on neutron-induced gamma ray from formation elements. Furthermore, fracture density can be calculated using the formation capture cross-section before and after hydraulic fracturing based on pulsed neutron capture logging. However, the response sensitivity of the macroscopic scattering cross section to the fractures will decrease when the fracture density is high due to the neutron self-shielding phenomenon. Therefore, an improved fracture density evaluation method is applied, which combines the macroscopic capture cross section and the neutron self-shielding correction factor. In the new method, the peak area of titanium from the captured gamma spectrum was used to obtain a neutron self-shielding correction factor, in order to improve the sensitivity of fracture density determination. Furthermore, the response of capture cross-section variation to fracture density at various tagged proppant concentrations and formation backgrounds was investigated. The findings indicate that the tagged proppant concentration influences the detection limit of fracture density and the sensitivity of fracture density identification. The accurate calculation range of fracture density using the new method has been extended from 5% to 10% under the condition that the tagged proppant concentration is 0.2%. Meanwhile, water salinity significantly impacts capture cross-section variation, while the effects of porosity, lithology, and fluid type on capture cross-section variation are negligible. A simulated fracturing example demonstrates the method's applicability in various measuring environments. The results show that fracture density and height are consistent with the model settings after correcting for water salinity, and the fracture density calculation error is less than 3%. Therefore, our proposed evaluation method for fracture density corrected for the neutron self-shielding effect improves response sensitivity and fracture density calculation accuracy.