An independently controllable active steering system for maximizing the handling performance limits of road vehicles

Abstract

This study explores the effectiveness of an active independent front steering system capable of applying a corrective steering at each wheel selectively and in an independent manner. In doing this, it is possible to generate the required adhesion force for active steering control while ensuring that none of the tyres approaches saturation. A non-linear yaw-plane model of a two-axle truck with a limited number of roll degrees of freedom is used to evaluate the effectiveness of the active independent front steering under a range of steering manoeuvres. A simple proportional-integral controller is synthesized to track the reference response based on the neutral steering system as well as to limit the steering correction considering the saturation limit of the tyres, which is defined from the normalized cornering stiffness properties of the tyres. The directional responses obtained for the vehicle model integrating the active independent front steering controller are compared with those of the conventional active front steering system for each of the selected manoeuvres. The results show that, while both the control strategies can effectively track the target yaw rate of the vehicle, the proposed active independent front steering control can yield enhanced performance limits without any of the tyres approaching the saturation limit, irrespective of the road condition and the steering manoeuvre. Furthermore, the active independent front steering design permits some adhesion reserve for each wheel for generating additional traction and braking forces during a severe steering manoeuvre.

Analysis of cornering response and stability of electrified heavy commercial road vehicles with regenerative braking

“…Considering weight transfer on each wheel improves the vehicle stability during turning and braking on lowtraction road surfaces. Farazandeh et al 11…”

Coordinated control of active front steering and active disturbance rejection sliding mode-based DYC for 4WID-EV

“…The paper 35 puts forward a method to divide the working area of AFS and DYC system according to the linear area of the curve of tire lateral force changing with the tire lateral slip angle, which will be used in this paper as well.…”

“…The measurement method is to take the tire lateral slip angle corresponding to the point where the slope of the tire lateral force curve starts to decline with the change of tire lateral slip angle as the critical value of the linear-transition area. According to the reference, 35 the tire lateral slip angle corresponds to the point where the slope drops to 30% as the critical value of the transition-saturation area.…”

Developing an active variable-wheelbase system for enhancing the vehicle dynamics

“…Active steering control systems control the yaw dynamics of vehicles by adding or subtracting an additional steering angle to the front wheels and/or the rear wheels. 7 Although active steering control systems do not have the weaknesses of direct yaw moment control systems, they cannot guarantee an acceptable performance in non-linear operational region of vehicles (e.g. high-lateral-acceleration manoeuvres).…”