An Integrated Sand Cleanout System by Employing Jet Pumps

The substantiation of the choice of design parameters characterizing the mutual orientation of the mixed flows and the ratio of the geometric dimensions of the elements of the flow path of the jet pump that provide an increase in the energy characteristics of borehole ejection systems is given. Depending on the mutual orientation of the mixed flows, three variants of the design of the jet pump are possible, viz. the one with a parallel orientation of the working and ejected flows, the one with the inlet of the ejected flow at a sharp angle, and the one with a perpendicular orientation of the working and ejected flows. The magnitude of the angle between the velocity vectors of the mixed flows directly affects the intensity of vortex formation in the mixing chamber, the amount of energy loss and the efficiency of the jet pump; however, the simplicity of their manufacture remains the determining condition for choosing the design variant of the elements of ejection systems. Based on the use of the laws of conservation of energy, the amount of motion and continuity of the flow, it is determined that the level of energy loss during mixing flows is directly proportional to the magnitude of the angle of entry of the ejected medium. In the course of computer simulation of the jet pump workflow, an asymmetric distribution of hydrodynamic parameters for the non-parallel orientation of the mixed flows has been obtained. In order to reduce energy losses when mixing flows, the value of the angle of entry of the ejected flow must be taken in the range from 0 to 15°. In the case of the implementation of the zero head mode and the maximum ejection coefficient, minimal energy losses during mixing of flows are provided for the main geometric parameter of the jet pump equal to 2.375. In the course of experimental studies, the inverse dependence of the maximum value of the efficiency of a borehole jet pump on the value of its main geometric parameter represented as a power function, has been established. When using ejection systems that implement long-term technological processes (e. g., during oil production), it is necessary to take the minimum possible value of the main geometric parameter of the jet pump for the specified operating conditions.

show abstract

Three-Stage SAGD Liner Intervention to Remediate a Liner System Using Concentric Coiled Tubing Jet Pump Technology

Winkler

Luebke

Jensen

et al. 2018

Day 1 Tue, November 27, 2018

View full text Add to dashboard Cite

Excessive solids production and liner issues are familiar complications in maturing SAGD operations, potentially causing well integrity concerns. There are several factors that can occur, in isolation or in combination, to cause excessive solids production and/or liner failures in SAGD wells. Reservoir characteristics, well construction and known downhole conditions contribute to production results and potential liner degradation over time. The production strategy typically considers fluid mechanics, metallurgy, and thermal cycling to limit steam breakthrough, channeling, and/or low sub-cool events. Even with the best construction and production practices, the gradual accumulation of solids in a production well can limit optimal productivity. SAGD Operators may choose a downhole intervention to mitigate the potential of a future failure or require an intervention to prepare for liner remediation. The paper begins by outlining common cleanout methods used in SAGD wells. Then, it discusses a SAGD downhole intervention in three stages: (1) a jetting venturi cleanout, (2) a gauge mill run, and (3) installation of a remedial liner system. The jetting venturi cleanout is comprised of concentric coiled tubing coupled with an engineered jet pump. It is designed to artificially lift wellbore materials, cleaning the SAGD wellbore while recording the volume of solids returned from a specific location. The gauge mill run confirms an acceptable diameter for smooth liner installation. These first two stages ensure seamless installation of the remedial liner system to mitigate detrimental mechanisms that limit production or impact well integrity. Two case studies, in two heavy oil formations from two Operators, support the effectiveness of the SAGD liner intervention. The case summaries and results demonstrate the success of the SAGD liner intervention, corroborate its consistent and repeatable use and show its compatibility with remedial techniques in SAGD operations. The paper establishes the importance of effectively cleaning and clearing a SAGD wellbore in preparation for liner remediation and to provide insight into future well integrity operations.

show abstract

An Integrated Sand Cleanout System by Employing Jet Pumps

Abstract: Sproule is a diversified, worldwide petroleum consulting firm. We have been in business for over 50 years and have experience in all aspects of the energy sector throughoutNorth America and the world.

Cited by 5 publications

References 12 publications

Numerical Assessment of the Pressure Recovery of the Turbulent Flow in a Venturi-Type Device

Numerical Assessment of the Pressure Recovery of the Turbulent Flow in a Venturi-Type Device

Improving the Energy Efficiency of the Use of Oil Jet Pumps

Three-Stage SAGD Liner Intervention to Remediate a Liner System Using Concentric Coiled Tubing Jet Pump Technology

Contact Info

Product

Resources

About