The accuracy of defect localisation and its size quantification is poor in the detection of internal defects of cylindrical components using the ultrasonic Amplituden und Laufzeit Orts-Kurven (ALOK) method. The influence of acoustic beam spread is not taken into consideration in the
ultrasonic ALOK method, resulting in difficulties with the precise characterisation of the defect state. To address this, the relationship between the acoustic distance, amplitude, ultrasonic frequency, size and depth of hole defects was studied. The acoustic distance curve and the amplitude
curve were fitted and then the localisation model of the defect was obtained. The acoustic beam spreading angle and echo sound pressure were introduced and then the size quantification model for defects was acquired based on principal component analysis (PCA). Both the simulated and experimental
results show that the modified ALOK algorithm improved the detection accuracy of the defect location and its size and the relative error of defect sizing decreased by more than 35% compared with the original algorithm.