An Underappreciated Radiation Hazard from High Voltage Electrodes in Vacuum

Abstract

The use of high voltage (HV) electrodes in vacuum is commonplace in physics laboratories. In such systems, it has long been known that electron emission from an HV cathode can lead to bremsstrahlung x rays; indeed, this is the basic principle behind the operation of standard x-ray sources. However, in laboratory setups where x-ray production is not the goal and no electron source is deliberately introduced, field-emitted electrons accelerated by HV can produce x rays as an unintended hazardous byproduct. Both the level of hazard and the safe operating regimes for HV vacuum electrode systems are not widely appreciated, at least in university laboratories. A reinforced awareness of the radiation hazards associated with vacuum HV setups would be beneficial. The authors present a case study of a HV vacuum electrode device operated in a university atomic physics laboratory. They describe the characterization of the observed x-ray radiation, its relation to the observed leakage current in the device, the steps taken to contain and mitigate the radiation hazard, and suggested safety guidelines.

The metastable Q 3Δ2 state of ThO: a new resource for the ACME electron EDM search

“…Trajectory simulations predict the flux gain from such a magnetic lens is about 50% lower than the electric version, due to both the lower trap depth and the smaller cross-sectional area. However, such a magnetic lens produces no difficulties with high voltage breakdown nor X-ray emission [37], which might make it simpler to implement than the electric lens.…”

Augmented reality direct current glow discharge experimentation

“…This is because the extent of injuries that can arise from high voltage electricity flowing through the body are severe and even life threatening [8,9]. Recently, the hidden dangers of radiation emissions from high voltage electrodes in vacuum have also been highlighted [10].…”

Electrostatic focusing of cold and heavy molecules for the ACME electron EDM search

“…Multiple Geiger-Müller counters are installed around the lens system to monitor possible x-ray generation during HV operation[30]. X-ray count rates above the background level trigger a safety interlock to turn off the HV system.…”