Analysis and field applications of water saturation models in shaly reservoirs

Abstract

Shaly sandstone reservoirs have complex pore systems with ultra-low to low interparticle permeability and low to moderate porosity. This has led to development of several models to calculate water saturation in shaly sandstone reservoirs using different approaches, assumptions and certain range of conditions for application. This study has used actual well logging data from two different fields of South Texas and North Sea to evaluate and compare the most popular five shaly sandstone models for calculating water saturation. Furthermore, sensitivity analysis of tortuosity coefficient (a), cementation exponent (m) and water saturation exponent (n) is achieved to investigate their effects on computed values of water saturations using different models. The results indicated that the increase of shale volume decreases water saturation calculated for all popular models. In addition, the increase of tortuosity coefficient and/or cementation exponent (m) causes overestimation of water saturation while the increase of saturation exponent (n) results in underestimation values. The results also showed that the increase of shale volume decreases water saturation calculated for all popular models. In addition, the increase of tortuosity coefficient and/or cementation exponent (m) causes overestimation of water saturation while the increase of saturation exponent (n) results in underestimation values.

Evaluation the Calculation of Watersaturation With Simandoux and Indonesia Method in the P Layer R Field

“…After interpreting the log qualitatively, the quantitative log interpretation is then carried out to determine the value of shale volume, porosity and water saturation in the four wells. The existence of a thin shale value in the formation makes it necessary to do a calculation to get the volume shale value that affects the calculation of the Simandoux Method water saturation and the Indonesian Method (Shedid & Saad A, 2017).…”