Analysis Combustion Efficiency in a Fluidized-Bed Combustor With a Modified Perforated Plate for Air Distribution

Abstract

Combustion efficiency is one of the most important parameters, especially in the FBC combustion chamber. Investigations into the efficiency of combustion in FBC fuels using solid biomass waste fuels in recent years are increasingly in demand by researchers around the world. Specifically, this study aims to calculate the combustion efficiency in the FBC combustion chamber. Combustion efficiency is calculated based on combustion results from modification of hollow plates in the FBC combustion chamber. The modified hollow plate aims to control combustion so that the fuel incorporated can burn out and not saturate. The combustion experiments were tested using palm oil biomass solid waste fuels such as PKS, OPM, and EFB. The results of the measurements showed that the maximum combustion temperature for MCC fuel reached 863oC for M1 and 887oC on M2. The maximum combustion temperature measurements for M1 and M2 from OPM fuel testing reached 898oC and 858oC, respectively, while the maximum combustion temperature for EFB fuel was 667oC andM2 847oC, respectively. The rate of combustion efficiency with the modification of the hole plate in the FBC combustion chamber reached 96.2%. Thermal efficiency in FBC combustion chamber for OPM 72.62%, MCC 70.03%, and EFB 52.43%. The highest heat transfer rates for OPM fuel reached 7792.36 w/m, MCC 7167.38 w/m, and EFB 5127.83 w/m. Thus, modification of the holed plate in the FBC chamber showed better performance of the plate without modification.