Analysis of the process of qualifying the welding technology of S355JR structural steel using the submerged arc welding method

Abstract

This paper presents the issue of welding technology qualification using the example of structural steel S355JR with a plate thickness of 25 mm and 100 mm, bevelling V. The main objective of this work was to attempt to perform a full qualification of the submerged arc welding process in accordance with the requirements of PN EN ISO 15614. Particular attention was paid to the issue of the qualification of welding technology. The samples were subjected to non-destructive testing, i.e. visual and penetrant testing, as well as ultrasonic testing and heat treatment. This was followed by destructive testing, including macroscopic testing and hardness testing. According to the proposed procedure for the recognition of submerged arc welding technology, once the necessary tests had been carried out and the protocols with positive results had been obtained. The documentation had been completed, the analysis needed to obtain certificates of conformity for factory production control and welding quality was carried out.Submerged arc welding is often used for highly responsible butt joints, particularly when joining thick components. This has been achieved through the proper design of the preparation of the parts to be welded and the development of a welding technology that practically eliminates the pre-phase that occurs in traditional technology, thereby eliminating the risk of it affecting the quality of the welded joint.During the implementation of submerged arc welding, a number of technological problems were encountered. The first test joints contained many defects, i.e. sticking and slag inclusions inside the welds. In addition, obtaining welds with the correct profile and removing the slag from the weld groove was difficult. These obstacles were eliminated experimentally by carrying out successive tests using different parameters and welding groove geometries.The correct implementation of any welding process depends on its input parameters. These parameters include welding current, welding speed, welding current, wire diameter, welding voltage and many others. Submerged arc welding (SAW) is widely used in the industry for manufacturing as it is more reliable, provides deep penetration in the work, ensures a smooth finish on objects, and results in high productivity.The technology was developed for a company that manufactures control discs for steam turbines.

The Influence of TIG Welding Technology on the Properties and Quality of Joints Made of Dissimilar Steels

“…Figure 5 shows the sample with the positioning plates and the thermal insulation material "pad" visible in a top view [Łabanowski 2010;Ferenc 2013;Wieczorska and Domżalski 2021]. The root, or the first layer of the weld, was made using ø2.0 OK Tigrod 13.12 -ESAB filler.…”