Heat transfer from a wedge to fluids at any Prandtl number can be predicted using the asymptotic model. In the asymptotic model, the dependent parameter N uJReJ12 has two asymptotes. The first asymptote is NuxIRex112/>,->o that corresponds to very small value of the independent parameter Pr. The second asymptote is NuJReJ'2 Pr^oo, that corresponds to very large value o f the inde pendent parameter Pr. The proposed model uses a concave down ward asymptotic correlation method to develop a robust compact model. The solution has two general cases. The first case is P -0.198838. The second case is the special case of separated wedge flow (fl = -0.198838) where the surface shear stress is zero, but the heat transfer rate is not zero. The reason for this division is Nux/Rex112 ~ Pr1'3 for Pr 1 in the first case while NuJReJ12 ~ Pr1'4 for Pr > 1 in the second case. In the first case, there are only two common examples o f the wedge flow in prac tice. The first common example is the flow over aflat plate at zero incidence with constant external velocity, known as Blasius flow and corresponds to f = 0. The second common example is the two-dimensional stagnation flow, known as Hiemenez flow and corresponds to f = l (wedge half-angle 90deg). Using the meth ods discussed by Churchill