The presence of harmful oxidizing gases accelerates the oxidation of cellulose fibers in paper, resulting in reduced strength and fading ink. Therefore, the development of highly sensitive NO2 gas sensors for monitoring and protecting books holds significant practical value. In this manuscript, ZnO/MoS2 composites were synthesized using sodium molybdate and thiourea as raw materials through a hydrothermal method. The morphology and microstructure were characterized by X-ray diffraction analysis (XRD), energy dispersive spectroscopy (EDS), field emission scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The ZnO/MoS2 composite exhibited a flower-like structure, with ZnO nanoparticles uniformly attached to the surface of MoS2, demonstrating advantages such as high specific surface area and good uniformity. The gas sensitivity of the ZnO/MoS2 nanocomposites reached its peak at 260 °C, with a sensitivity value around 3.5, which represents an improvement compared to pure ZnO, while also enhancing sensitivity. The resistance of the ZnO/MoS2 gas sensor remained relatively stable in air, exhibiting short response times during transitions between air and NO2 environments while consistently returning to a stable state. In addition to increasing adsorption capacity and improving light utilization efficiency, the formation of hetero-junctions at the ZnO-MoS2 interface creates an internal electric field that effectively promotes the rapid separation of photo-generated charge carriers within ZnO, thereby extending carrier lifetime.