Anomaly Detection during Thermoplastic Composite Infusion: Monitoring Strategy through Thermal Sensors

Abstract

Vacuum assisted resin infusion (VARI) processes are widely used for the fabrication of large composite parts. For some years now, wind blades are designed with thermoset composite materials, however, recyclability is often the missing brick. The recent advent of thermoplastic materials such as ELIUM©, developed by ARKEMA, shows the possibility to consider the manufacture of very large parts such as wind turbine blades with recyclable constituents [1]. The French institute IRT Jules Verne is leading the research project ZEBRA, with a consortium of industrials, focusing on different thematics of the manufacturing of wind turbine blades, including process monitoring. In the objective of evaluating the possibility for anomaly detection during the ELIUM© infusion process, an infusion test bench was developed, equipped with different sensors including infrared camera, thermocouples and heat flow sensors. In this work, the thermal sensors are evaluated by the study of several infusion scenarios of plates fabricated under different process conditions and material parameters. Artificial anomalies are imposed into the process to evaluate the potential of these sensors to detect the induced disturbances. A numerical process modelling is developed, compared to the sensor outputs and used to achieve a better understanding of some effects observed during the process.

Thermo-chemical modeling and simulation of glass/elium® acrylic thermoplastic resin composites

“…One model is selected and evaluated using a PAM-RTM© simulation for pure resin and the infusion of Owens Corning glass/Elium® composites [1]. The numerical results are compared with experimental data collected from Vacuum-assisted resin infusion (VARI) tests with the help of a robust monitoring system [2]. Then the model is used to predict the flow and polymerization behavior for thick and more complex parts.…”