Application of an ampholine-functionalized hybrid organic-inorganic silica material for the SPE of aromatic amines

Shao

2016

J. Sep. Science

This paper describes the use of graphene oxide/silica modified with nitro-substituted tris(indolyl)methane as a solid-phase extraction sorbent for the determination of organic acids. The resultant graphene oxide/silica modified with nitro-substituted tris(indolyl)methane was characterized by FTIR spectroscopy and adsorption experiments. Solid-phase extraction parameters such as sorbent type, sample solution pH, sample loading rate, eluent salt concentration, eluent methanol concentration, elution rate, sample loading, and elution volume were optimized. The method showed good precision, accuracy, sensitivity, and linear response for organic acids analysis over a concentration range of 1-100 μg/L for benzoic acid, p-methoxybenzoic acid, and salicylic acid and 5-100 μg/L for the remaining organic acids (cinnamic acid, p-chlorobenzoic acid, and p-bromobenzoic acid) with coefficients of determination (r(2) ) of higher than 0.9957. Limits of detection from 0.50 to 1.0 μg/L for six organic acids were achieved. The developed method was successfully applied to determine organic acids in real samples.

Section: Resultsmentioning

confidence: 99%

Preparation of a graphene oxide/silica composite modified with nitro-substituted tris(indolyl)methane as a solid-phase extraction sorbent for the extraction of organic acids

Shao

2016

J. Sep. Science

“…SPE is a powerful sample pretreatment technique, which has many supercharacteristics such as high enrichment factor, low organic solvent consumption, high recovery, simple operation, and easy automation, so SPE is widely used for separation and enrichment of analytes from real complex matrices . For the SPE technique, the key section is its extraction material that determines the extraction ability.…”

Section: Introductionmentioning

confidence: 99%

Zinc sulfide nanosheets as a novel solid-phase extraction material for flavonoids

et al. 2017

J. Sep. Sci.

As a novel solid-phase extraction material, zinc sulfide nanosheets were prepared by a simple method and were used to extract flavonoids. We used scanning electron microscopy to show its nanosheet morphology and energy dispersive X-ray spectroscopy and powder X-ray diffraction to confirm its chemical and phase compositions. Coupled to a high-performance liquid chromatography, the zinc sulfide nanosheets were packed into a microcolumn and were used to extract four model flavonoids to examine their extraction ability. The parameters of sample loading and elution were investigated. Under optimized conditions, the analytical method for flavonoids was established. For the method, wide linearities from 1 to 250 μg/L and low limits of detection from 0.25 to 0.5 μg/L were obtained. The relative standard deviations for single column repeatability and column to column reproducibility were less than 7.7 and 10.4%, respectively. The established method was also used to analyze two real samples and the recoveries from 88.7 to 98.2% further proved the reliability of the method. Moreover, the zinc sulfide nanosheets have good stability and that in one column can be reused for more than 50 times. This work proves that the prepared zinc sulfide nanosheets are a good candidate as the flavonoids sorbent.

Recent development of hybrid organic‐silica monolithic columns in CEC and capillary LC

Liu

et al. 2014

Electrophoresis

As an attractive alternative to organic and silica monoliths, hybrid organic-inorganic monolith somewhat combines the advantages of them, such as high surface area, excellent mechanical strength, and thermal stability. We have reviewed the preparation and application of hybrid monoliths in 2011 and 2013. The preparation approaches have been mainly summarized into three categories: (1) common sol-gel process using trialkoxysilanes and tetraalkoxysilanes as precursors; (2) "one-pot" process of alkoxysilanes and organic monomers simultaneously via sol-gel chemistry and free radical polymerization; and (3) other polymerization of silane-containing monomers. Herein, we would focus on the recent progress and development of preparation approaches, mainly covering the literatures since July of 2012. First, the direct synthesis approach of hybrid monoliths via sol-gel chemistry and following postmodification was an important route to fabricate various monolithic stationary phases, particularly, to modify the hybrid monoliths containing amino, epoxy, vinyl, and other groups. Second, "one-pot" process, as a novel preparation approach of hybrid monoliths, was further developed in the past 2 years, in which various organic functional monomers, not only water-soluble monomers, but also hydrophobic monomers could be added in the preparation system. Other polymerization techniques in the preparation of organic monolithic materials, particularly, free radical polymerization and ring-opening polymerization, were successfully transferred to fabricate the hybrid monoliths by using silane-containing monomers including POSS monomers or other self-synthesized monomers.