Application of Product of Vitrification of Asbestos-Cement Waste and CRT Glass Cullet as Reinforcing Phase in Surface Composites Produced by FSP Method

Abstract

In this study, the vitrification of asbestos-cement waste (ACW) and glass cullet from cathode-ray tubes (CRTs) was performed. The resulting product of vitrification from the abovementioned waste was used as the reinforcing phase in a composite with the AA7075 alloy matrix. The composite was made by means of the FSP (friction stir processing) method. The main aim of this work was to determine whether the product of the vitrification can be utilized as the reinforcing phase in the composite. The tests show that introducing the vitrification product into the composite matrix increases both the hardness of the material and its wear resistance. The composite was characterized by a 39% higher hardness and 30.4% higher wear resistance compared to the initial AA7075 alloy. The changes in the properties were caused by strong refinement of the grains, but primarily by the presence of the hard particles of the reinforcing phase in the composite matrix. This research demonstrates that vitrified material, thanks to its properties, can constitute a full-value reinforcing material that can ultimately replace more expensive engineering materials in composites.