In 2020, the Beirut port silos, located few meters away from the center of August 4 explosion, were severely damaged. The first and second row of Beirut silos/East side were destroyed. However, the third row of silos was damaged and experienced an immediate tilt, except the last two silos in the South block (silos #130 and 137) that were destroyed. As a result, the remaining standing silos, have been monitored since the day of the blast using 3D scan measurements and triaxial inclinometers, experienced severe tilting over time. In July 2022, the rate of silos' inclination increased after a fire broke out in the North block silos due to grains' fermentation. As a result, in August 2022, the last silos of the North block fell after resisting severe tilting for two years with a maximum permanent vertical inclination of 2 m. Consequently, the 8.5 m diameter-42 silos supported by a 2500 pile foundation consisted as of August 2022 of 6 standing South block silos. In this paper, the authors describe the status of these silos and the performed structural health monitoring. A 3D finite element model was built in Abaqus to analyze the behavior of the silos under different seismic loadings. The results are evaluated in terms of horizontal displacements at top of the silos which are used to assess the stability of the structure. The obtained results show that the South block silos will exhibit serious damage and possible failure in case of moderate intensity earthquakes. Therefore, a repair and strengthening method to preserve the remaining standing silos using numerical analysis is proposed.