Atmospheric pressure uniform dielectric barrier discharge (DBD) in a wide air gap initiated from a narrow starting point

Abstract

It is believed that the maximum spacing for generating a uniform non-equilibrium plasma in atmospheric pressure air is 4 mm. In this paper, we propose a new type of DBD discharge structure to address this challenge. The left end of the structure rapidly increases the discharge spacing from 0.5 mm to 6 mm, while the right side of the main discharge gap maintains a uniform spacing of 6 mm. Nanosecond pulse voltage is used to drive the plasma, an ICCD camera is used to capture the image of the plasma during a discharge pulse cycle, which indicates that a uniform plasma within the 6mm spacing of the main discharge gap is generated. Upon further reducing the ICCD camera's exposure time to 20 ns, it is revealed that the uniform plasma is formed due to the rapid propagation of the plasma from left to right at a speed of order of 105 m/s. Due to the small transverse component of the external electric field, this rapid propagation behavior cannot be due to the external electric field. Therefore, this paper further proposes the hypothesis of electric dipole formation leading to this fast propagation. The hypothesis suggests that the charge separation on the surface of the anode forms an electric dipole, which generates a local discharge at its right end. This local discharge further triggers the discharge in the main gap, and the main gap discharge, in turn, forms a dipole due to charge separation again, by repeating this cycle, the plasma propagates rapidly to the right. Further analysis demonstrates that this dipole can indeed produce a strong electric field of up to 41 kV/cm at its right end, which is sufficient to induce a local discharge. Moreover, under such a strong electric field, the electron migration rate can indeed reach 105 m/s.