Autonomous Robotic Sensing for Simultaneous Geometric and Volumetric Inspection of Free-Form Parts

Abstract

Robotic sensing is used in many sectors to improve the inspection of large and/or complex parts, enhancing data acquisition speed, part coverage and inspection reliability. Several automated or semi-automated solutions have been proposed to enable the automated deployment of specific types of sensors. The trajectory to be followed by a robotic manipulator is typically obtained through the offline programmed tool paths for the inspection of a part. This method is acceptable for a part with known geometry in a well-structured and controlled environment. The part undergoing assessment needs to be precisely registered with respect to the robot reference system. It implies the need for a setup preparation phase for each new part, which can be very laborious and reliant on the human experience. This work combines real-time robot control and live sensor data to confer full autonomy to robotic sensing applications. It presents a novel framework that enables fully autonomous single-pass geometric and volumetric inspection of complex parts using one single robotised sensor. A practical and robust robot control sequence allows the autonomous correction of the sensor orientation and position to maximise the sensor signal amplitude. It is accompanied by an autonomous in-process path planning method, capable of keeping the inspection resolution uniform throughout the full extension of the free-form parts. Last but not least, a by-product of the framework is the progressive construction of the digital model of the part surface throughout the inspection process. The introduced framework is scalable and applicable to widely different fields.

Electric Vehicle Battery Disassembly Using Interfacing Toolbox for Robotic Arms

“…The ITRA toolbox has been designed to enable the seamless integration of industrial robotic arms with server computers, sensors, and actuators, providing a platform that is both highly adaptable and extendable [11]. It has extensively been adopted in robotic non-destructive testing applications [24,25]. It enables real-time adaptive robotic responses and the control of multiple robots simultaneously.…”

Fine Alignment of Thermographic Images for Robotic Inspection of Parts with Complex Geometries

“…Robotic NDT inspections generally occur in a well-structured environment, where the part position is precisely registered with respect to the robot reference system. Great care is dedicated to ensuring the robot tool path is accurately referenced to the sample reference frame to ensure effective data collection during automated inspections [24]. Despite the efforts, a deviation between the actual tool path and the ideal tool path always remains due to the following reasons: (i) the physical tolerances in the robot joints; (ii) the geometric deviations in the mounting support of the sensing instrumentation; (iii) the residual inaccuracy in the calibration of the part position; (iv) the deviation between the actual sample geometry from the part digital counterpart.…”

Robotization of the IR-Thermographic technique – impact on the visualisation quality and considerations on the data workflow

“…To get over these challenges, some six-axis robotic arm applications for automating ultrasonic nondestructive testing (NDT) inspection have been developed [5][6][7][8][9][10][11]. Other than these uses, automation has not been attained in other inspection kinds; thermographic infrared (IR) testing is one example of this.…”