Bending fault evaluation for the HP-IP rotor system of the nuclear steam turbine based on the dynamic model

Abstract

With considering the unbalance mass-fluid film bearings-rotor elements, a dynamics model for the nuclear half-speed 1000 MW saturated steam turbine with No. Dongfang HN1089 is constructed. By solving of the Reynolds Equation and the dynamics model, the oil pressure distribution and dynamic coefficients of the fluid film bearings, and the unbalance response of the rotor, are obtained. The method for evaluating the bending fault based on the dynamics model is proposed, in which the bending parameter is transformed as the unbalance mass. A case on the bending fault evaluation for HN1089 is carried out. The results show that the response sensitivity of HN1089 on the unbalance mass is about 1/6 that of the thermal power units with the same capacity (1000 MW); and it is difficult to decrease the excited response from the bending fault even to add the maximum unbalance mass. In actual, the removing stress in the partial zone and turning method are applied to deal with the HP-IP rotor bending fault, and the response of the repaired rotor is 0.033 m by the actual field test. The results show the model and the method for evaluating the bending fault are accurate and reasonable, which will provide the important theoretical guide for fast and accurately dealing with such bending fault in the steam turbine rotor system.

Investigation of oscillations of the case of steam turbine with a capacity of 500 MW

“…Переходной патрубок, конденсаторы и связи между элементами системы турбина-фундаментоснование моделировались с помощью дополнительных масс и граничных условий [11][12][13][14]. За счет особенностей такого способа моделирования система связей турбины с фундаментом аппроксимирует три состоянияжесткая связь, свободное опирание и упругое взаимодействие [15][16][17][18][19][20]. Для расчетов колебаний была использована конечно-элементная модель из 27 040 узлов и 23 165 конечных элементов [21].…”