Bond strength evaluation of lithium disilicate and zirconium oxide-based substructures using two different veneering techniques

Background Several interfacial surface treatments of zirconia surfaces have been proposed to improve adhesion to ceramic veneering. However, information regarding the durability and effect of such treatments on the bond strength following such treatments is lacking. Aim of the study This study aimed to evaluate the shear bond strength between veneering ceramic and zirconia core after different interfacial surface treatments. Materials and methods Fifty-two discs (8 mm in diameter and 3 mm in height) were fabricated from zirconia blanks using a microtome cutting machine. Zirconia discs were divided into four groups (n = 13). Group I was subjected to air-borne abrasion using (Al2O3), group II was coated by bioglass, group III was coated with ZirLiner, and group IV was subjected to wash firing (sprinkle technique). A cylinder (4 mm in diameter and 3 mm in height) of veneering ceramic was fired on top of the zirconia core. Shear bond strength (SBS) between zirconia core and veneering ceramic was evaluated by using a universal testing machine. The data was collected and statistically analysed using One-Way ANOVA followed by multiple pairwise comparisons using Bonferroni adjusted significance level. The failure modes were assessed using a stereomicroscope for each group. Results The highest mean bond strength was recorded in group III (17.98 ± 2.51 MPa), followed by group II (15.10 ± 4.53 MPa), then group I 14.65 ± 2.97 MPa. The lowest mean bond strength was recorded in group IV (13.28 ± 3.55 MPa). Conclusions Surface treatments had an effect on the zirconia-veneer shear bond strength. Liner coating revealed the highest shear bond strength values, significantly higher in comparison to wash firing (sprinkle technique) .

show abstract

scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.

Contact Info

customersupport@researchsolutions.com

10624 S. Eastern Ave., Ste. A-614

Henderson, NV 89052, USA

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Blog Terms and Conditions API Terms Privacy Policy Contact Cookie Preferences Do Not Sell or Share My Personal Information

Made with 💙 for researchers

Part of the Research Solutions Family.

Bond strength evaluation of lithium disilicate and zirconium oxide-based substructures using two different veneering techniques

Cited by 4 publications

References 35 publications

Basicity, Electronegativity, Optical Parameters and Radiation Attenuation Characteristics of P2O5-As2O3-PbO Glasses Doped Vanadium Ions

Basicity, Electronegativity, Optical Parameters and Radiation Attenuation Characteristics of P2O5-As2O3-PbO Glasses Doped Vanadium Ions

The effect of different blade designs on shear bond strength of veneering ceramics fused to zirconia

Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core

Contact Info

Product

Resources

About