Cavitation characteristics and energy loss in high-pressure differential control valve

Abstract

Purpose The purpose of this study is to determine the cavitation flow characteristics of the high-pressure differential control valve. The relationship between cavitation, flow coefficient and spool angle is obtained. By analyzing the relationship between different spool angles and energy loss, the energy loss at different spool angles is predicted. Design/methodology/approach A series of numerical simulations were performed to study the cavitation problem of a high-pressure differential control valve using the RNG k–e turbulence model and the Zwart cavitation model. The flow states and energy distribution at different spool angles were analyzed under specific working conditions. Findings The cavitation was the weakest when the spool angle was 120° or the outlet pressure was 8 MPa. The pressure and speed fluctuations of the valve in the throttle section were greater than those at other locations. By calculating the entropy production rate, the reason and location of valve energy loss are analyzed. The energy loss near the throttling section accounts for about 92.7% of the total energy loss. According to the calculated energy loss relationship between different regions of the spool angle, the relationship between any spool angle and energy loss in the [80,120] interval is proposed. Originality/value This study analyzes the cavitation flow characteristics of the high-pressure differential control valve and provides the law of energy loss in the valve through the analysis method of entropy. The relationship between spool angle and energy loss under cavitation is finally proposed. The research results are expected to provide a theoretical basis for the optimal design of valves.