Characterisation of anodic films formed on titanium and its alloys

Abstract

The properties of the anodic oxide films formed on titanium and its implant alloys Ti-5Al-4V and Ti-6Al-4Fe are investigated in this paper. Anodic oxide films were prepared by electrochemical treatment in 3M sulphuric acid solution at 60 V for 1 min, followed by a thermal treatment consisting of heating at 500 8C for 24 h and then cooling in water. Electrochemical impedance spectroscopy (EIS) measurements were carried out at open circuit potential. Nyquist and Bode spectra exhibit a two-time constant system, attesting an oxide with two layers: a barrier inner oxide and a porous outer one. All spectra change in time, indicating a thickening of the films. Open circuit potentials were monitored (long-term, 25,000 exposure hours) in Ringer 2 solution of different pH values (6.98, 4.35, 2.5) for titanium, Ti5Al-4V and Ti-6Al-4Fe alloy but without treatment with the purpose to compare the biomaterial behaviour. It was pointed out some variations of the open circuit potentials around electropositive values, suggesting slow dissolution, re-passivation or adsorption processes.

Effect of Si Contents on the Properties of Ti15Mo7ZrxSi Alloys

“…Titanium-molybdenum (Ti-Mo) alloys have gained attention as potential biomaterials due to their favorable mechanical and corrosion resistance. Ti-Mo alloys can form a stable oxide layer on their surface, protecting them from corrosion and degradation in aggressive environments [18][19][20].…”