Characteristics of the flow around finite wall-mounted square cylinders and the mechanism of tonal noise

Abstract

Motivated by the need to reduce the noise from train pantographs, numerical simulations are carried out for the flow over finite wall-mounted square cylinders with different aspect ratios at a Reynolds number of 1.5×104. Five aspect ratios (height-to-width ratios) are taken into account, namely, 1.4, 4.3, 7.1, 10, and 12.9. The effect of the aspect ratio on the aerodynamic coefficients, the near-wall flow topologies, and the pressure distributions are studied in detail to give insight into the noise generation mechanisms. The pressure rate of change dp/dt on the cylinder surfaces is adopted to evaluate the dipole noise source. It turns out that distributions of dp/dt are closely related to flow evolutions near the free ends and the wall-mounting junctions of cylinders with different aspect ratios. High levels of dp/dt are found close to lateral trailing edges of the cylinder, while the strength grows quickly as the aspect ratio is increased. The far-field noise emitted from these cylinders is predicted using the Ffowcs Williams–Hawkings acoustic analogy and validated with wind tunnel measurements available in the literature. For receivers located in the cross-flow direction, a single acoustic tone near a Strouhal number of 0.1 is observed for cylinders with aspect ratios not greater than seven, while an additional tone at a higher Strouhal number occurs as the aspect ratio is further increased. The underlying mechanism of the tonal noise emitted to the far field is also investigated by combining the noise source localization and dynamic mode decompositions.