One of the main challenges for healthy hydrocarbon yields from the production wells is the sand production, and its control assumes significant importance for successful production operations. The prime objective remains to control the sand production without compromising on the fluid flow rates. Sand production is conventionally associated with diverse heterogeneous formations, especially poorly consolidated formations. Scrutinizing fluid flow rates at different orientations of perforations is a valuable analysis in controlling the sand production. This study was conducted to examine the case of sand production in a few development wells from Malleshwaram field of the Krishna Godavari (KG) basin in south India and provide alternatives to arrest this sand production. The influence of oriented perforations on fluid flow rates to minimize sanding tendencies was examined. Sand grain diameter was estimated using the distribution plots of the grain sizes obtained from the photomicrographs, and the average value of the grain size was estimated around 100 μm. The fluid flow model was simulated for actual scenario in the hydrocarbon bearing Nandigama formation using finite element modeling (FEM). Sanding tendencies in these formations were studied at varying depletion rates. Critical draw down pressure (CDDP), which is a function of both critical bottom hole pressure and reservoir pore pressure, for well 1 and well 2 is estimated as 4650 Psi and 3400 Psi, respectively, at 0% depletion. CDDP was used to estimate the onset of sanding, and the flow rate for horizontal perforation was calculated as 0.024548 $${\mathrm{m}}^{3}$$
m
3
/sec. Strength parameters, namely the unconfined compressive strength (UCS) and cohesion, were also investigated in all the wells to decipher the formation strength and a possible linkage to sanding. These results present a completely fresh analysis of the sanding potential and the related parameters responsible for it in these formations. Fluid flow rates for the producing reservoir are studied at different set of oriented and sized perforations. It was observed that a hiked flow rate in horizontal perforations maintains the production in a safe and no-sanding zone. This study provides vital information and a workflow for similar heterogeneous complex formations for designing the well completions, augmenting economic production and reinforcing future reservoir management.
