Chemical modification of waste paper: An optimization towards hydroxypropyl cellulose synthesis

Joshi, Gyanesh; Rana, Vikas; Naithani, Sanjay; Varshney, V. K.; Sharma, Arun; Rawat, Jaipal Singh

doi:10.1016/j.carbpol.2019.115082

Cited by 41 publications

(31 citation statements)

References 21 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The bands in the region 2880-2974 cm -1 and that centered at 1464 cm -1 are attributed to C-H stretching, respectively to C-H in-plane bending vibrations. Other spectral bands, such as, 1335 cm -1 (CH2 rocking vibration at C6), 1381 cm -1 (CH in-plane bending), 1418 cm -1 (HCH in plane bending vibration, CH2 scissoring motion, CH2 symmetric bending at C6) are also attributed to alkyl units of the cellulose chain (Sharma et al, 2009;Abdel-Halim et al, 2015;Joshi et al, 2019).…”

Section: Ftir Analysismentioning

confidence: 99%

Cellulose derivative/barium titanate composites with high refractive index, conductivity and energy density

Barzic¹,

Soroceanu²,

Rotaru³

et al. 2022

Cellulose

View full text Add to dashboard Cite

High refractive index and transparent materials are useful in various technical domains, ranging from energy sector to microelectronics. This work deals with polymer composites prepared by embedding small amounts of barium titanate in hydroxypropyl cellulose matrix. Optical transparency of the composite films varies in agreement with polymer doping level. Light dispersion in the prepared composites allowed evaluation of specific parameters, which are related to the sample structural order and possible optical transitions. Conductivity of the composites is increased due to ceramic particle addition in the polymer. Dielectric studies reveal that the prepared materials are suitable for electric energy storage applications.

show abstract

Section: Ftir Analysismentioning

confidence: 99%

Cellulose derivative/barium titanate composites with high refractive index, conductivity and energy density

Barzic¹,

Soroceanu²,

Rotaru³

et al. 2022

Cellulose

View full text Add to dashboard Cite

show abstract

“… 29 , 39 For the support of the sulfur ligand, the authors have focused on cellulose filter paper (CFP) that is advantageous due to its abundance, inexpensiveness, accessibility, mechanical strength, and high surface area. 40 , 41 In our previous work, we synthesized the effective adsorbent CFP- g -PHCTMA from O -1-mercapto-3-phenoxypropan-2-yl-2-hydroxyethylcarbamothioate (HCT) and CFP grafted with poly(glycidyl methacrylate) (CFP- g -PGMA). CFP- g -PHCTMA showed good and selective adsorption capability toward the precious metals Ag(I), Pd(II), and Au(III).…”

Section: Introductionmentioning

confidence: 99%

Synthesis of a Highly Selective Scavenger of Precious Metals from a Printed Circuit Board Based on Cellulose Filter Paper Functionalized with a Grafted Polymer Chain Bearing N-Methyl-2-hydroxyethylcarbamothioate Moieties

Hyder

Ochiai

2022

ACS Omega

View full text Add to dashboard Cite

We report the synthesis and practical application of a novel scavenger for precious metals. The scavenger was prepared from cellulose filter paper with grafted chains of poly(glycidyl methacrylate) modified with a novel ligand group of N -methyl-2-hydroxyethylcarbamothioate moieties, introduced by the reaction with O -1-mercapto-3-phenoxypropan-2-yl N -methyl-2-hydroxyethylcarbamothioate. Batch experiments were performed to evaluate the capability of the scavenger in ranges of pH and acid concentration as well as to determine the kinetics and isotherm models. The scavenger was found to adsorb only Ag(I), Pd(II), and Au(III) from an aqueous media in the presence of coexisting ions of different bases and precious metals at wide ranges of pH and acid concentration. The adsorption rates fit a pseudo-second-order kinetic equation, and the adsorption reached equilibrium within 60 min. The isotherm studies indicated that the obtained data were a good fit with the Langmuir model. The maximum adsorption capacities of Ag(I), Pd(II), and Au(III) were 126.95, 124.67, and 230.67 mg g –1 , respectively. Regeneration experiments indicated that the adsorbent maintained 97% of its initial efficiency even after five adsorption/desorption cycles. The scavenger was effectively utilized to recover Ag(I), Pd(II), and Au(III) from an aqua regia solution of waste printed circuit boards.

show abstract

“…The cellulose can be dried for 24 hours using an oven [17]. The cellulose slurry was given NaOH (0.5-2.5 M/AGU) then cooked at a temperature of 20-60°C for1-3 hours after which the cellulose was filtered [18].…”

Section: Introductionmentioning

confidence: 99%

“…International Journal of Innovative Research and Scientific Studies, 5(1) 2022, pages:[18][19][20][21][22][23][24][25][26][27][28][29] …”

mentioning

confidence: 99%

The Characterization of Nanocellulose with Various Durations and NaOH Concentration

Suanto

Saloma

Usman

et al. 2022

ijirss

View full text Add to dashboard Cite

Nanotechnology has become an important part of industrial construction, especially in concrete structural materials. Additionally, waste is a severe environmental problem when using paper can impact waste caused by waste. The inner nanocellulose is sourced from paper waste and then synthesized using natrium hydroxide (NaOH) and natrium hypochlorite (NaClO). Nanocellulose from waste paper was synthesized with a 5%, 10%, and 15% NaOH solution and a 2% NaClO solution with variations in heating time (2 hours, 4 hours, and 6 hours) at a temperature of 125C. The physical, chemical, and microstructural properties were analyzed using Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Energy Dispersive X-ray (EDX), and Fourier-transform Infrared Spectroscopy (FT-IR). The XRD results show a higher amorphous percentage after chemical synthesis. A 15% concentration heated for 6 hours, resulted in 79.68% amorphous content, and the lowest amorphous percentage in 5% NaOH with a heating duration of 4 hours, resulting in 63.69% amorphous content. Conversely, if added, acid can reduce the amorphous content and increase the crystal structure. The results of the FT-IR analysis show that treatment using NaOH and NaClO can remove lignin and hemicellulose structures in cellulose fibers. The SEM results show that the size of the structure is smoother and cleaner after treatment with NaOH and NaClO. The results of the EDX test show that with the NaOH and NaClO treatment, the chemical content was close to the chemical content of OPC. Thus, nanocellulose can be used as a substitute for some cement materials in concrete mixtures.

show abstract

Chemical modification of waste paper: An optimization towards hydroxypropyl cellulose synthesis

Cited by 41 publications

References 21 publications

Cellulose derivative/barium titanate composites with high refractive index, conductivity and energy density

Cellulose derivative/barium titanate composites with high refractive index, conductivity and energy density

Synthesis of a Highly Selective Scavenger of Precious Metals from a Printed Circuit Board Based on Cellulose Filter Paper Functionalized with a Grafted Polymer Chain Bearing N-Methyl-2-hydroxyethylcarbamothioate Moieties

The Characterization of Nanocellulose with Various Durations and NaOH Concentration

Contact Info

Product

Resources

About