Due to rapid advances in wireless communication, wireless sensor networks, and information technologies; it is now possible to integrate a level of smartness in the home environment. This paper deals with the proposed design and its implementation required to Wireless Fan Regulator. The main use of this regulator is to adjust the rotation speed of the fan using remote consisting of Zigbee, potentiometer, microcontroller, LCD at the transmitting section (remote unit), and Zigbee, LCD and dimmer at the receiving section (Slave unit). The device would allow a person to control the rotating speed of a fan by simply pointing the remote potentiometer or by pressing any key on the remote. The key target is that it can easily work approximately at a distance of 60 meters from the fan. There are two endpoints used, one is to transmit and the other one is to receive. At the transmitting section Zigbee module is used to transmit the data and at the receiving section also Zigbee module is used to receive the data and it will also display the same on LCD. The requirements of the power consumption are less in Zigbee communication i.e this communication is used in this paper. Since the transceivers power consumption is very less in Zigbee protocol communication so it's pretty obvious that Zigbee Protocol communication is the prime choice for smart object development.