Cold pressing of copper single crystals for a large-area doubly focusing monochromator

Abstract

The design for a large-area doubly focusing neutron monochromator consists of a large number of small square copper single crystals mounted onto thin aluminium blades that both buckle and rotate independently. This avoids the need for large individual alignment mechanisms for each crystal that introduce unacceptably high levels of background. However, it does require that the crystals be oriented such that the diffracting crystallographic planes are parallel to the crystal face. Cold pressing broadens the natural narrow mosaic of the virgin crystal discs to increase the diffracted intensity. This introduces anisotropy into the crystal that determines its orientation in the ®nal monochromator. The alignment procedure used for each crystal before cutting out the square tile in the correct orientation is described. A few crystals are characterized in detail by neutron diffraction at various stages of the operation, revealing the variation in the mosaic width and the angular position of the reciprocal-lattice vector as a function of the azimuthal angle by rotating the crystal about the normal to its face. The twofold symmetry of the mosaic width of the pressed crystal is modulated by the 2% periodicity introduced by the precession of the reciprocallattice vector around the crystal face normal. Satisfactorily aligned crystals have a variation in the angular position for diffraction within the allowed tolerance.research papers 456 Mildner, Brand and Clem Cold pressing of copper single crystals

Double-Focusing Thermal Triple-Axis Spectrometer at the NCNR

“…The double-stack system developed for the thermal instruments is shown in Fig. 2 , with the PG(002) and cold-pressed Cu(220) monochromator crystals installed for the BT-7 instrument [ 5 ]. Each monochromator consists of 100 squares that are 2×2 cm 2 each for a total height and width of 20 cm.…”

Single-crystal diamond: a potential gem in neutron instrumentation

“…This is not because they are theoretically the best materials, as will be shown later, but because they are the best presently available crystals (excluding Be, of course). As mentioned above, they are grown as perfect or nearly perfect crystals and then plastically deformed to generate the required mosaic spread, ranging between a few minutes of arc up to degrees, and can even be made anisotropic (Freund, 1975;Mildner et al, 2004;. [Several Si crystals are used on instruments at CNBC, Chalk River, for example, on the C2 diffractometer (L. Cranswick, private communication).…”