Colored amorphous silica‐based powder with TiN nanocrystals precipitated by ammonolysis of Ti–Si–O ternary glass

Abstract

Coloration of amorphous silica powder containing titania was investigated by nitridation in an ammonia flow. The oxide precursors were obtained by the hydrolysis of a mixture of tetraethyl orthosilicate (TEOS) and tetrabutoxy titanium (TBT). The color changed with the amount of TBT in the mixture, the hydrolysis pH and the ammonolysis temperature. The original white color of the 8 mol% TBT powder hydrolyzed under basic pH conditions changed to pale goldenrod at 700°C, then to dark olive green at 800°C, and further darkened with increasing ammonolysis temperature. A steel-blue color appeared at 900°C for the powder obtained with 3 mol% TBT, and increased in darkness at 1000°C. A similar bluish color was observed for powders obtained by acidic hydrolysis after ammonolysis above 900°C, and this was independent of the amount of titania, although the chroma decreased with increasing firing temperature for the powder with 3 mol% TBT. The ammonolysis powder products were characterized using X-ray diffraction (XRD), electron probe micro analysis (EPMA), transmission electron microscopy-electron energy-loss spectroscopy (TEM-EELS), scanning transmission electron microscopy-high-angle annular dark-field imaging (STEM-HAADF) and Ti-K edge X-ray absorption fine structure (XAFS). The color change was related to both precipitated TiN nanocrystals and residual titanium in the amorphous silica matrix. The TiN exhibited a goldish reflection and also plasmonic absorption from light blue to gray depending on the TiN crystallite size. The plasmonic absorption and resonance of nanocrystalline TiN will be useful similarly to that of gold in nanotechnology for various kinds of energy application.

Boosting H2O2 Activation for the Efficient Degradation of Dimethyl Sulfoxide-Containing Wastewater over Supported Niobia Catalysts

“…The support material, fumed SiO 2 , exhibits a broad peak at 22°which is the feature of amorphous silica. 30 The XRD patterns of 3−20% Nb 2 O 5 /SiO 2 are similar to that of fumed SiO 2 , and no conspicuous peak of Nb 2 O 5 is observed (Figure 3a). The reason might be that Nb 2 O 5 is highly dispersed on the huge surface of SiO 2 (200 m 2 /g), rendering very small Nb 2 O 5 particles.…”

“…The XRD patterns of the synthesized catalysts are shown in Figure . The support material, fumed SiO 2 , exhibits a broad peak at 22° which is the feature of amorphous silica . The XRD patterns of 3–20% Nb 2 O 5 /SiO 2 are similar to that of fumed SiO 2 , and no conspicuous peak of Nb 2 O 5 is observed (Figure a).…”