In this study, an electroless (electrode-less) copper plating technology was developed to prepare the high-reactive and robust iron-copper (Fe/Cu) bimetallic particles. First, effect of pretreatment and key preparation parameters (e.g., complexant, H 3 BO 3 , NiSO 4 $7H 2 O, pH and plating time) on the reactivity of Fe/Cu bimetallic particles were investigated, respectively. Their reactivity was evaluated according to the obtained K obs for PNP removal. Also, the characteristics of Fe/Cu bimetallic particles prepared by electroless plating and displacement plating were comparatively observed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The analysis results show that when Fe/Cu bimetallic particles were prepared by electroless plating, copper was uniformly deposited on the surface of Fe 0 substrate, and only a few bulky particles were observed. However, plenty of loose copper blocks were heterogeneously distributed on the surface of Fe 0 substrates when the Fe/Cu bimetallic particles were prepared by the conventional displacement plating. Furthermore, the operational life and reactivity of Fe/Cu bimetallic particles prepared by electroless and displacement plating process were comparatively investigated by the recycling experiment. The results suggest that the new Fe/Cu bimetallic particles have a longer operational life than that of the conventional Fe/Cu bimetallic particles. Meanwhile, it can be seen from the control experiments that the new Fe/Cu bimetallic particles have a stronger reactivity for the PNP removal both in Fe/Cu/air and Fe/Cu/N 2 processes. As results, the new electroless plating for the preparation of Fe/Cu bimetallic particles is superior to the conventional displacement plating. In other words, the electroless copper plating is a promising technology to prepare the high-reactive and robust Fe/Cu bimetallic particles.