In
this work, the influence of direct dual fuel injection on a
compression ignition engine fueled with gasoline and diesel has been
investigated. To do this, closed cycle combustion simulations have
been performed. Gasoline has been supplied through port injection
and early direct and late direct injection to achieve fuel stratification
and emission reduction. Simulations have been done for various start
of injection (SOI) timings of diesel fuel. A detailed discussion on
a low temperature heat release (LTHR) mechanism has been done. Results
revealed that the maximum gross indicated thermal efficiency (GITE)
of 39% is obtained for port injection of gasoline mode. Direct dual
fuel combustion (type 2) (DDC2) mode shows approximately 2% and 38%
less GITE and oxides of nitrogen (NOx), respectively, and 40% more
soot as compared to the port injection gasoline mode. DDC2 mode shows
lower oxides of carbon and hydrocarbon emissions as compared to other
dual fuel modes. More than 99% of combustion efficiency and less maximum
pressure rise rate have been noticed in the DDC2 case. Strong LTHR
and high temperature premixed combustion region have been found in
advanced SOI timing cases (in DDC2). In-cylinder contours for the
DDC2 case show that diesel and gasoline fuels combusted successively
cause less in-cylinder temperature than that for the conventional
dual fuel combustion case.