The field of wind energy has made significant progress, yet there is always room for improving efficiency and the energy extracted from horizontal axis wind turbines HAWTs. There is interest in new renewable energies, including wind energy. This study aims to investigate the effect of trailing edge flap on the performance of the turbine at different numbers of blades, different blade angles, and flap angles. Therefore, an experimental setup includes a model of wind turbine was constructed. The performance of a HAWT model with trailing edge flaps added is examined in this research using the findings of wind tunnel tests. A model with two, three, and six-bladed rotors with a diameter of 260 mm was employed for the wind tunnel tests. The wind turbine model is tested at various blade angles and tip speed ratios. The model was initially tested at various blade angles without any flaps, β, of 10 o , 15 o and 20 o , with two, three, and six-bladed rotors and secondly the wind turbine model was tested with additional trailing edge flaps with flap angle, α, of 40 o , 50 o and 60 o . It was found that the use of trailing edge flaps can improve the HAWT performance.