Comparison of Two Bandage Splint Constructs in an Ex Vivo Equine Metacarpal Fracture Model

Abstract

Objectives The aim of this study was to compare the deflection distance, deflection angle and pre-loading sub-bandage pressure of a transverse, mid-metacarpal fracture in an equine cadaver limb when loaded in bending while stabilized with either a Robert Jones Bandage (RJB) or a single-stack bandage (SS), each containing two orthogonal splints. Study Design In an ex vivo experimental study, forelimb pairs from eight horses were collected, and one forelimb from each pair was assigned to either the SS or RJB groups. A transverse osteotomy was performed at the midpoint of the metacarpus. After bandaging, the limbs were loaded in bending. Pre-loading sub-bandage pressure, pre- and post-loading radiographs and post-loading deflection distance measurements were taken. Dorsopalmar radiographs were used to measure the loaded deflection angle. Results There was no significant difference between RJB and SS constructs in change in deflection angle (10.7 ± 3.0 degrees vs. 9.8 ± 2.6 degrees; p = 0.5) or deflection distance (13.1 ± 2.6 cm vs. 11.4 ± 3.1 cm; p = 0.2). Sub-bandage pressures were significantly greater for the SS than the RJB both dorsally and laterally. Conclusions The SS splint construct resists bending forces similarly to the RJB splint construct in an ex vivo transverse, metacarpal fracture model. The SS splint construct may be a useful alternative to the RJB splint construct in field situations for metacarpal fracture stabilization.