Computation of kinematic attributes for pre‐stack time migration

Extracting true amplitude versus angle common image gathers is one of the key objectives in seismic processing and imaging. This is achievable to different degrees using different migration techniques (e.g., Kirchhoff, wavefield extrapolation, and reverse time migration techniques) and is a common tool in exploration, but the costs can vary depending on the selected migration algorithm and the desired accuracy. Here, we investigate the possibility of combining the local‐shift imaging condition, specifically the time‐shift extended imaging condition, for angle gathers with a Kirchhoff migration. The aims are not to replace the more accurate full‐wavefield migration but to offer a cheaper alternative where ray‐based methods are applicable and to use Kirchhoff time‐lag common image gathers to help bridge the gap between the traditional offset common image gathers and reverse time migration angle gathers; finally, given the higher level of summation inside the extended imaging migration, we wish to understand the impact on the amplitude versus angle response. The implementation of the time‐shift imaging condition along with the computational cost is discussed, and results of four different datasets are presented. The four example datasets, two synthetic, one land acquisition, and a marine dataset, have been migrated using a Kirchhoff offset method, a Kirchhoff time‐shift method, and, for comparison, a reverse time migration algorithm. The results show that the time‐shift imaging condition at zero time lag is equivalent to the full offset stack as expected. The output gathers are cleaner and more consistent in the time‐lag‐derived angle gathers, but the conversion from time lag to angle can be considered a post‐processing step. The main difference arises in the amplitude versus offset/angle distribution where the responses are different and dramatically so for the land data. The results from the synthetics and real data show that a Kirchhoff migration with an extended imaging condition is capable of generating subsurface angle gathers. The same disadvantages with a ray‐based approach will apply using the extended imaging condition relative to a wave equation angle gather solution. Nevertheless, using this approach allows one to explore the relationship between the velocity model and focusing of the reflected energy, to use the Radon transformation to remove noise and multiples, and to generate consistent products from a ray‐based migration and a full‐wave equation migration, which can then be interchanged depending on the process under study.

Section: Introductionmentioning

confidence: 99%

Investigating a time‐shift extended imaging condition in a Kirchhoff pre‐stack depth migration algorithm

O’Brien¹,

Delaney²,

Igoe³

et al. 2018

Seismic interferometry by tangent‐phase correction

Poletto

Farina

Böhm

et al. 2014

We present a modified interferometry method based on local tangent‐phase analysis, which corrects the cross‐correlated data before summation. The approach makes it possible to synthesize virtual signals usually vanishing in the conventional seismic interferometry summation. For a given pair of receivers and a set of different source positions, a plurality of virtual traces is obtained at new stationary projected points located along the signal wavefronts passing through the real reference receiver. The position of the projected points is estimated by minimizing travel times using wavefront constraint and correlation‐signal tangent information. The method uses mixed processing, which is partially based on velocity‐model knowledge and on data‐based blind interferometry. The approach can be used for selected events, including reflections with different stationary conditions and projected points with respect to those of the direct arrivals, to extend the interferometry representation in seismic exploration data where conventional illumination coverage is not sufficient to obtain the stationary‐phase condition. We discuss possible applications in crosswell geometry with a velocity anomaly and a time lapse.

Pre‐stack Kirchhoff depth migration local space‐shift imaging condition: synthetic and data examples

O’Brien¹,

Delaney²,

Igoe³

2019

A B S T R A C TExtracting accurate common image angle gathers from pre-stack depth migrations is important in the generation of any incremental uplift to the amplitude versus angle attributes and seismic inversions that can lead to significant impacts in exploration and development success. The commonly used Kirchhoff migration outputs surface common offset image gathers that require a transformation to angle gathers for amplitude versus angle analysis. The accuracy of this transformation is one of the factors that determine the robustness of the amplitude versus angle measurements. Here, we investigate the possibility of implementing an extended imaging condition, focusing on the space-lag condition, for generating subsurface reflection angle gathers within a Kirchhoff migration. The objective is to determine if exploiting the spatial local shift imaging condition can provide any increase in angle gather fidelity relative to the common offset image gathers. The same restrictions with a ray-based approach will apply using the extended imaging condition as both the offset and extended imaging condition method use travel times derived from solutions to an Eikonal equation. The aims are to offer an alternative ray-based method to generate subsurface angle gathers and to understand the impact on the amplitude versus angle response. To this end, the implementation of the space-shift imaging condition is discussed and results of three different data sets are presented. A layered three-dimensional model and a complex two-dimensional model are used to assess the space shift image gathers output from such a migration scheme and to evaluate the seismic attributes relative to the traditional surface offset common image gathers. The synthetic results show that the extended imaging condition clearly provides an uplift in the measured amplitude versus angle over the surface offset migration. The noise profile post-migration is also improved for the space-lag migration due to the double summation inside the migration. Finally, we show an example of a space-lag gather from deep marine data and compare the resultant angle gathers with those generated from an offset migration and a time-shift imaging condition Kirchhoff migration. The comparison of the real data with a well log shows that the space-lag result is a better match to the well compared to the time-lag extended imaging condition and the common offset Kirchhoff migration. Overall, the results from the synthetics and real data show that a Kirchhoff migration with an extended imaging condition is capable of generating subsurface angle gathers with an * Pre-stack Kirchhoff depth migration 1185 incremental improvement in amplitude versus angle fidelity and lower noise but comes at a higher computational cost.