Summary
Lead‐based fast reactors (LFRs) have unique advantages in the development of a SMR, which has attracted a lot of attention in recent years. In this paper, an optimized design for a lead‐bismuth small modular reactor was studied on the basis of the design of SUPERSTAR. This paper aims to propose an improved LFR core scheme to enhance the neutronic performance as well as the thermal‐hydraulic safety of the reference reactor. Advanced nitride fuel is adopted in which the plutonium is used as the driven fuel, while thorium is used as the fertile fuel. Subchannel analysis was performed in the assembly design using an in‐house subchannel code, SUBAS, and an 11 × 11 scheme with a pitch‐to‐diameter (P/D) ratio of 1.4 was chosen. Using the modified assembly, the core was redesigned using the coupled code MCORE. The active core was divided into four zones with different enrichment of 239Pu to extend the core lifetime and flatten the power distribution. The main kinetic parameters and reactivity coefficients were obtained. Neutronic performance at different operation times was also studied. The maximum radial power peak factor was 1.28, while the maximum total power peak factor was 1.737. During the whole lifetime, the reactivity swing was 0.926$, which was below the limit of 1$. The subchannel study of the core flow distribution showed that a flow distributor is needed to further improve the flow distribution capability. The peaking cladding temperature was 508.7°C, and the maximum fuel center temperature was 723.4°C, both of which do not exceed the limit temperature. Compared with features of SUPERSTAR, the peaking cladding temperature was well improved and the lifetime extended.