Consolidation and Dehydration Effects of Mildly Degraded Wood from Luoyang Canal No. 1 Ancient Ship

This study examines the effects of drying oils—Tung and linseed—on the properties of traditional polychrome coatings applied to wood. Samples prepared with cinnabar, malachite green, yellow ochre, and azurite pigments were analyzed using colorimetric, gloss measurements, surface roughness testing, adhesion strength, and SEM imaging. The results show that Tung oil generally enhances gloss by over 20% and provides superior adhesion, consistently achieving an adhesion grade of 0 (no peeling) across all pigments. Linseed oil, although effective at higher concentrations, displayed more variable adhesion, particularly with blue and yellow pigments. Surface roughness measurements revealed that higher oil content (6:4 ratio) reduced roughness, achieving smoother finishes with Ra values as low as 2.36 μm for Tung oil. SEM analysis confirmed that Tung oil yields a smoother and more even pigment distribution compared to the rougher, clustered morphology in linseed oil samples. These findings underscore the importance of oil type and concentration in achieving desired esthetic and durability outcomes in restoration work.

Effect of Drying Oil on Properties of Traditional Painted Coatings

Chen,

Ge,

Zuo

et al. 2024

The Effect of Bone Glue on the Performance of Traditional Painted Furniture Ground Layers

Chen,

Xu,

Chen

et al. 2024

This research investigates how the inclusion of bone glue affects the performance of traditional painted furniture ground layers, particularly under dry–wet cycling conditions. The ground layers, applied to wood substrates in seven different ratios of bone glue to gypsum powder (10%, 20%, 30%, 40%, 50%, and 60%), were tested for mass changes, dimensional stability, adhesion, and surface roughness. The results showed that higher bone glue content (especially 50% and 60%) led to improved stability, reduced mass fluctuations, and better dimensional stability. The 50% bone glue sample exhibited the best overall stability with minimal weight change (<1.6%) and reduced shrinkage. Adhesion strength increased with bone glue content, reaching 3.48 MPa at 60% bone glue. Lower bone glue content resulted in poor adhesion and visible defects such as cracking and blistering. SEM analysis confirmed that higher bone glue content enhanced bonding between the ground layer and the wood substrate.

Progress in the Experimental Design and Performance Characterization of Artificial Accelerated Photodegradation of Wood

Chen,

Gao,

Duan

et al. 2024

Wood, a natural and renewable material, is extensively utilized in furniture, construction, and outdoor landscapes due to its sustainability and esthetic appeal. However, exposure to environmental elements, particularly sunlight, leads to photodegradation, affecting wood’s chemical and physical structure. This degradation results in color fading, increased surface roughness, and reduced mechanical properties, shortening the lifespan of wooden products. Artificial accelerated photodegradation tests have become a crucial method for studying wood’s aging process under controlled laboratory conditions, mimicking prolonged exposure to sunlight. This review explores the mechanisms behind wood photodegradation, focusing on the effects of UV radiation on wood’s major components—cellulose, hemicellulose, lignin, and extractives. Additionally, it summarizes the latest advancements in experimental design for artificial aging tests, including factors like radiation source selection, temperature, and humidity control. The paper also highlights performance characterization methods for evaluating the impact of photodegradation on wood’s physical, chemical, and mechanical properties. Understanding these processes is essential for enhancing the durability of wood products and developing effective treatments for wood preservation in outdoor environments.