Constraint multi-objective optimal design of hybrid renewable energy system considering load characteristics

Abstract

Finding the optimal size of a hybrid renewable energy system is certainly important. The problem is often modelled as an multi-objective optimization problem (MOP) in which objectives such as annualized system cost, loss of power supply probability etc. are minimized. However, the MOP model rarely takes the load characteristics into account. We argue that ignoring load characteristics may be inappropriate when designing HRES for a place with intermittent high load demand. For example, in a training base the load demand is high when there are training tasks while the demand decreases to a low level when there is no training task. This results in an interesting issue, that is, when the loss of power supply probability is determined at a specific value, say 15%, then it is very likely that most of loss of power supply would occur right in the training period which is unexpected. Therefore, this study proposes a constraint multi-objective model to deal with this issue—in addition to the general multi-objective optimization model, the loss of power supply probability over a critical period is set as a constraint. Correspondingly, the non-dominated sorting genetic algorithm II with a relaxed $$\epsilon $$ ϵ constraint handling strategy is proposed to address the constraint MOP. Experimental results on a real world application demonstrate that the proposed model and algorithm are both effective and efficient.

Multi-Objective Optimization of an Islanded Green Energy System Utilizing Sophisticated Hybrid Metaheuristic Approach

“…The best model should be used to calculate the output power of a wind turbine. The Equation ( 2) is often used to calculate the power output of a wind turbine [36]. In meteorological stations, the normal height for measuring wind speed with an anemometer is 10 m.…”

A dual-population constrained multi-objective evolutionary algorithm with variable auxiliary population size

“…Many optimization problems in the real world usually contain multiple objective functions and complex constraints, which can be collectively referred to as constrained multi-objective optimization problems (CMOPs) [1][2][3]. Generally, CMOPs can be defined by the following formula [4]:…”

Design and Optimization of a Grid-Connected Solar Energy System: Study in Iraq

“…It was found that the crow algorithm is more cost-effective and efficient than the particle swarm optimization algorithm. A multiobjective optimization model developed in [11] determines the best configuration of a PV/wind/diesel/battery hybrid generation system. The experimental results in real-world applications confirmed the effectiveness of the system.…”