The use of on-site soil extractions for direct quantification provides a fast and efficient method for environmental monitoring and mineral prospecting. In this study, an on-site extraction protocol was developed and tested on northern boreal soils using partial extractants: 0.01 M calcium chloride (CaCl
2
) and 0.43 M nitric acid (HNO
3
). CaCl
2
is commonly used as an extractant for mobile and directly available elements, while 0.43 M HNO
3
is used to extract also the reactive pool with the weakly bound elements from soil particle surfaces. These two extractants were chosen because they have (i) no specific constraints for electrochemical or spectrometric analysis for element quantification and (ii) are more environmentally friendly than the ones often used for mineral exploration; e.g., the aqua regia (AR) or mobile metal ions like Ionic leach
TM
(IL, ALS).
Extractions with HNO
3
offered the same patterns as those obtained with AR but with better contrast for anomalies, while the CaCl
2
results were very similar to those obtained with IL. Nevertheless, neither HNO
3
nor CaCl
2
was effective in mobilizing Au, W, or Sn due to their low concentrations. Our study demonstrated that on-site soil extractions with HNO
3
and CaCl
2
were potentially good candidates for the detection of REEs, such as Ce and La, and some trace elements, especially Cd, for both extractions, Co, Pb and U with HNO
3
, and Mn and Ni with CaCl
2
. This work highlights the potential of on-site extraction using partial extractants. This is a key step prior to the quantification of elements by on-site voltametric techniques.
Supplementary material:
https://doi.org/10.6084/m9.figshare.c.7188745
;
https://doi.org/10.24396/ORDAR-138